Olympus E-PM2 - Manual (Page 64)

64 EN
Frequently-used options and customization
3
3 Take pictures.
• a is displayed in green when shooting starts.
• Press  to delete the last shot.
• The previous shot is superimposed on the view through the lens as a guide to
framing the next shot.
% Tips
• To overlay 3 or more frames: Select RAW for [K] and use the [Overlay] option to make
repeated multiple exposures.
• For more information on overlaying RAW images: g [Edit] (P. 65)
# Cautions
• The camera will not go to sleep while multiple exposure is in effect.
• Photographs taken with other cameras cannot be included in a multiple exposure.
• When [Overlay] is set to [On], the images displayed when a RAW image is selected are
developed with the settings at the time of shooting.
• To set the shooting functions, cancel multiple exposure shooting fi rst. Some functions
cannot be set.
• Multiple exposure is cancelled automatically from the fi rst picture in the following
situations.
The camera is turned off/The q button is pressed/The MENU button is pressed/The
shooting mode is set to a mode other than P, A, S, M/The battery power runs out/
Any cable is connected to the camera/You switch between the monitor and electronic
viewfi nder
• When a RAW image is selected using [Overlay], the JPEG image for the image recorded
in JPEG+RAW is displayed.
• When shooting multiple exposures using bracketing, priority is given to multiple exposure
shooting. While the overlay image is being saved, bracketing is reset to the factory default
setting.
Wireless remote control fl ash photography
The supplied fl ash unit and external fl ash units that offer a remote control mode and
are designated for use with this camera can be used for wireless fl ash photography.
g “Wireless remote control fl ash photography” (P. 109)
Digital Zoom (Digital Tele-converter)
Digital Tele-converter is used to zoom in beyond the current zoom ratio. The camera
saves the center crop. Zoom is increased by about 2×.
1 Select [On] for [Digital Tele-converter] in W Shooting Menu 1.
2 The view in the monitor will be enlarged by a factor of two.
• The subject will be recorded as it appears in the monitor.
# Cautions
• Digital zoom is not available with multiple exposures or when T, s, f, w, or m is
selected in SCN mode.
• When a RAW image is displayed, the area visible in the monitor is indicated by a frame.