Boss Audio Systems BR-600 - Manual (Page 167)

167
With Windows
Re
v0.10
Section 5
You can convert the BR-600’s track data into WAV or AIFF
files and save these on your computer.
After converting your mastered tracks to WAV or AIFF
files, you can easily use your computer to create audio CDs
with the data, as well as load the data into audio
applications.
1
Connect your computer and the BR-600 with a USB
cable.
2
Confirm that [PAD] is not lit, and with the recorder
stopped, press [UTILITY].
3
Press CURSOR [ ] [ ] to move the cursor to
“USB,” and press [ENTER].
The USB screen appears in the display.
4
Select “EXPORT” with the TIME/VALUE dial, then
press [ENTER].
fig.05-110
5
Press CURSOR [ ] [ ] to select the file format,
then press [ENTER].
WAV : This is an audio format used primarily with
Windows.
AIFF : This audio format is used primarily with
Macintosh.
6
Use CURSOR [ ] [ ] and the TIME/VALUE dial
to select the track/V-track to be saved.
When saving in mono
fig.05-120
When saving in stereo
* Select the track combination 1/2, 3/4, 5/6, or 7/8.
fig.05-130
7
Press [ENTER].
Conversion of the WAV or AIFF file begins.
Files names are converted as shown below.
(Mono) (Stereo)
Track 1, V-Track 1 Track 1/2, V-Track 1
TR01_ _ _1.WAV or TR0102 _1.WAV or
TR01_ _ _1.AIF TR0102 _1.AIF
Track 1, V-Track 2 Track 1/2, V-Track 2
TR01_ _ _2.WAV or TR0102 _2.WAV or
TR01_ _ _2.AIF TR0102 _2.AIF
Track 6, V-Track 7 Track 7/8, V-Track 7
TR06_ _ _7.WAV or TR0708_7.WAV or
TR06_ _ _7.AIF TR0708_7.AIF
Track 6, V-Track 8 Track 7/8, V-Track 8
TR06_ _ _8.WAV or TR0708_8.WAV or
TR06_ _ _8.AIF TR0708_8.AIF
* Converting songs takes approximately the same amount
of time (twice as long in stereo) to complete as it does to
play the source song data.
When the conversion is complete, the “BOSS_BR-600”
(or “Removable disk (*:)”) icon is added to the
computer.
fig.05-060
Saving BR-600 Track Data
in WAV/AIFF Format
(WAV/AIFF Export)
BOSS_BR-600 Removable Disk (*:)
(Ex.)