Boss Audio Systems BR-600 - Manual (Page 181)

181
With Macintosh
Re
v0.10
Section 5
8
Export the WAV or AIFF file to the computer.
1) Double-click the “BOSS_BR-600” icon.
2) Drag the WAV or AIFF file in the “USB” folder in
the “ROLAND” folder to the computer’s folder
and drop it in the folder.
fig.05-610
When you have finished exporting the data, the Idling
screen returns to the display.
9
Quit the connection to the computer.
1) Drag the “BOSS_BR-600” icon into the trash.
10
Press [EXIT].
The file format selection screen returns to the display.
The contents of the “USB” folder are automatically
deleted the instant the [EXIT] button is pressed.
* If you press [EXIT] without quitting the connection to the
computer, the following screens appear. In this case, pressing
[ENTER] returns the file format selection screen to the
display.
fig.05-620
At this point, you can safely disconnect the USB cable
from the BR-600 and the computer.
11
Repeat Steps 5–9 as needed.
12
When you have finished exporting the WAV or AIFF
file(s), press [EXIT] several times to return to the Play
screen.
When exporting WAV or AIFF files, a memory card needs
to have the following amounts of storage space remaining:
When exporting in “mono” :
approximately 5.1 MB per track per minute
When exporting in “stereo” :
approximately 10.1 MB per stereo track (two tracks) per minute
If there isn't enough storage space, and you get the “Card
Full!” error message, try the following two methods to
secure the necessary memory.
1.Deleting unneeded data from the
memory card
1
Back up the data on the card (see p. 178).
2
Erase unneeded songs (Song Erase) (see p. 86).
3
Also erase track data other than that for the tracks you
want to export (Track Erase) (see p. 82).
4
Carry out Song Optimize (see p. 87).
5
Export the data.
6
Recover the data (see p. 179).
2.Using a high-capacity memory card
For more on supported memory cards (CompactFlash) for
the BR-600, refer to the separate sheet “About Memory
Cards.”
1
Back up the data on the card (see p. 178).
2
Insert the high-capacity memory card in the BR-600,
then initialize the card (see p.199).
3
Recover the data (see p. 179).
■ Resolving insufficient memory
issues When exporting WAV/AIFF