Boss Audio Systems BR-600 - Manual (Page 84)

84
Editing the Performance on a Track (Track Edit)
Re
v0.10
3
Press CURSOR [ ] [ ] to move the cursor to
“ERS,” and press [ENTER].
fig.02-480
4
Turn the TIME/VALUE dial to select “AB” and press
[ENTER].
fig.02-490
5
Use CURSOR [ ] [ ] and the TIME/VALUE dial
to select the track/V-Track to erase from.
6
When you are ready to execute the erasure, press
[ENTER].
The display will ask “Are you sure?,” so that you can
confirm the operation.
7
Press [ENTER].
The erasure is executed.
8
Press [UTILITY] (or press [EXIT] repeatedly) to return
to the Play screen.
* During updating, “Keep power on!” appears in the upper
line of the display, while the lower line shows what is being
processed.
1
Confirm that [PAD] is not lit, then press [UTILITY].
2
Press CURSOR [ ] [ ] to move the cursor to
“TRK,” and press [ENTER].
fig.02-560
3
Press CURSOR [ ] [ ] to move the cursor to
“ERS,” and press [ENTER].
fig.02-570
4
Turn the TIME/VALUE dial to select “ALL” and press
[ENTER].
fig.02-580
5
Use CURSOR [ ] [ ] and the TIME/VALUE dial
to select the track/V-Track to erase.
6
When you are ready to execute the erasure, press
[ENTER].
The display will ask “Are you sure?,” so that you can
confirm the operation.
7
Press [ENTER].
The erasure is executed.
8
Press [UTILITY] (or press [EXIT] repeatedly) to return
to the Play screen.
* During updating, “Keep power on!” appears in the upper
line of the display, while the lower line shows what is being
processed.
■ Erasing a complete track
(ALL)