Bench Dog Tools Phenolic ProPlates - Manual (Page 16)

benchdog.com
©Copyright Bench Dog Tools, Inc. 2008
Toll Free 800-786-8902 page 16
r
outer table accessories
Zero clearance insert installed in a ProLift.
Use when routing very small stock.
Power-Loc mounted to our
ProFence. You can’t get
more convenient than this! Mounted to the underside
of router table. Will also
mount to the side. Universal bracket
enables multiple
mounting locations.
Centering cone installed, ready to
center guide bushing adapter to router.
Guide bushing installed, centered and
ready for template routing.
Power-Loc is an auxiliary power switch that can be mounted
almost anywhere. Its aluminum housing has six T-slots, and comes
with an angle bracket for universal mounting. The lighted switch
warns you when the power is on, a crucial feature when using routers
and other tools that come with their own power switch.
Power-Loc also
features a safety lock to prevent accidental tripping. 15 amp, 120V, 8'
cord. Non-magnetic. Includes mounting bracket and hardware.
ProGuard is essential for guarding your body
during freehand routing operations. Without a fence,
it’s too easy to momentarily forget where the bit is.
The polycarbonate shield resists the impact of chips
and flying debris, while the aluminum body ensures secure
mounting. ProGuard has a built-in dust port for cleaner, more
pleasant routing, better visibility and enhanced safety. ProGuard
also works great as a starting pin. You can mount ProGuard on
almost any plate or routertop (drilling and tapping two holes is
required). It bolts securely to the top of
ProLift or ProPlate
Aluminum without modification. Don’t put your body at risk!
➤
Mounts almost anywhere.
➤
The best components available .
➤
Switch lights up when powered.
➤
Built-in 2-1/2" dust port.
➤
Clearance hole for router bit bearing .
➤
Shatter-resistant polycarbonate shield.
➤
1-1/2" stock clearance under the guard .
➤
Use as a starting pin or fulcrum.
➤
Fits ALL ProLift and ProPlate Aluminum models
without modification.
The best way to stay on guard
when freehand routing!
Mount the switch where YOU want it!
Stock No. 40-022
That’s right, template routing
on the router table! Fits Porter-
Cable type guide bushings.
Comes with centering cone,
adapter and hardware. Fits all
Bench Dog Tools
ProLift and
ProPlate Aluminum models .
Use this zero clearance insert
with small bits and small pieces
of stock. Prevents small stock
from falling into the router bit
opening. Resists melting and
won’t harm your router bits.
Fits all ProLift and ProPlate
Aluminum models.
Stock No. 40-028
PC Guide Bushing Adapter
Stock No. 40-015
Zero Clearance Insert
Stock No. 40-039
16 Dog 08 SH 2/4/08 2:59 PM Page 1