Bench Dog Tools Phenolic ProPlates - Manual (Page 18)

benchdog.com
©Copyright Bench Dog Tools, Inc. 2008
Toll Free 800-786-8902 page 18
r
o
uter tables
Close-up photo of the cantilever clamps.
Large T-knobs are easy on the hands. Adjusting the sub-fences is easy.
No tools required! Built-in dust collection for 2-1/2" shop
vac hose. Built-in jointing capability! Included
shim bars slide into pre-formed slots
in the fence.
Routing long and thin stock is easy
with the superior hold-down power
of Feather-Loc! See page 17 for
more info!
With Panel-Loc, routing raised
panels is safe, easy and you get
better results. See page 19 for
more info!
Mount a Power-Loc auxiliary
power switch into ProFence’s
rear T-slot for added safety and
convenience. See page 16 for
more info!
A top-quality fence is the backbone of any
router table system. And with its feature-
loaded design, rugged strength and quality
construction, ProFence is a strong backbone indeed. ProFence
utilizes a heavy-duty aluminum extrusion that is fully machined on
the front and bottom surfaces. This ensures that your
ProFence
is flat, true and square. As for the design, no other fence packs
more features. The exclusive dual
EZ-Load T-slots accept our
Feather-Loc featherboards, Panel-Loc panel hold-down and
Power-Loc safety power switch. The MDF sub-fences adjust
without tools, perfect for zero clearance setup. ProFence also
comes with built-in jointing capability, dual position bit guard and
a dust collection port.
➤
Heavy-duty extruded and anodized aluminum.
➤
Precision-machined flat, square and true.
➤
Easy, tool-free setup with large T-knobs.
➤
Dual-position bit guard for large or small bits.
➤
1/4" accessory T-tracks on the front and back, now with
exclusive EZ-Load design!
➤
2-1/2" dust port mounted in back of fence.
➤
Built-in jointing capability.
➤
Easy adjust MDF subfences require no tools
Great accessories for your ProFence!
For strength and accuracy,
trust the best!
Stock No. 40-006
S PECIFICATION S
fence length 36" (ProFence36)
fence height 3-5/8" (overall)
accessory t-slots 1/4" front and back
jointer settings 1/32" or 1/16"
fence subfences MDF, 3/4" thick
bit guard dual position
clamp type cantilever (outboard)
dust port integral 2-1/2" — fits
shop-vac type hose
fits table size 24" to 32"
table thickness 3/4" min. 1-1/2" max.
weight 10 lbs.
ship weight 11 lbs.
MDF sub-fences adjust
without tools, perfect for
zero clearance operations.
Exclusive
EZ-Load T-slots.
Fits router tables
up to 36" wide.
Dual position bit guard.
18 Dog 08 SH 2/4/08 3:03 PM Page 1