Bench Dog Tools Phenolic ProPlates - Manual (Page 7)

benchdog.com
©Copyright Bench Dog Tools, Inc. 2008
Toll Free 800-786-8902 page 7
job site tools
Setup is fast and easy!
Outside
Miter Inside
Miter
Saw blade right, workpiece right Saw blade left, workpiece left Saw blade left, workpiece right. Saw blade right, workpiece left.
1. Adjust fence risers 2. Adjust crown stop 3. Place on saw and cut
CAPACITY
CHART
10" Miter Saw 12" Miter Saw
Up to 3-1/2" molding* Up to 5-1/2" molding*
*Some 10" miter saws are capable *Some 12" miter saws are capable
of cutting molding wider than 3-1/2" of cutting molding up to 6"
Crown-Cut holds the
molding at its intended
angle, eliminating the need
for complex compound cuts.
Cutting Outside 90° Corners Cutting Inside 90° Corners
U. S.Patent No. 6,938,528
Miter saw setup is fast
and easy. First, determine
if you’re cutting an inside
or outside miter. Then,
simply follow the setup
guide located on the tool.
Crown-Cut eliminates the complication of cutting crown and cove
molding, giving you perfect miters, every time. What’s the secret?
Crown-Cut holds the molding at its intended angle while you cut it.
No more compound cuts and tedious trial and error!
Before Crown-Cut , miscalculated compound cuts
produced sloppy miters that screamed for caulk and paint.
Crown-Cut requires only a simple miter cut that any miter saw
can do. For a professional-looking job, cut your crown and cove
the easy way. Even if you’re using the coping method
for inside miters,
Crown-Cut will prove just as useful
for the initial cuts.
➤
The safest and easiest way to cut crown molding.
➤
Eliminates trial and error.
➤
Produces perfect-fitting miters every time.
➤
No more complicated compound cuts!
➤
Fits all 10" and larger miter saws, both
regular and sliding.
➤
Exclusive fence risers adjust to fit crown
and cove molding up to 6" wide.
➤
Integral setup guide prevents costly miscuts!
➤
Completely portable. Does NOT need
to be attached to your miter saw.
Cut crown and cove the easy way!
Fence risers
adjust to fit taller
crown molding.
Setup guides are
mounted to the tool
for error-free
operation
Crown stop quickly
adjusts to lock molding
at the intended angle.
Stock No. 10-027
07 Dog 08 SH 2/4/08 2:47 PM Page 1