Oven lamp replacement, Shelves and shelf supports, Removing the oven shelf supports – Blanco BC 75 X User Manual

Page 16: The oven door

Advertising
background image

16

Oven lamp replacement

Disconnect the appliance.

Unscrew the lamp and substitute it with

another suitable for higher temperature

(300°C) having the following characteristics:

Tension: 230-240 (50Hz); Power:15W;

Connection:E14

Shelves and shelf supports

To clean the chrome parts of the oven, soak

in warm detergent water and remove

stubborn marks with a well wetted soap

impregnated pad. Rinse well and dry with a

soft cloth. Do not use abrasive scourers or

steel wool.

Removing the oven shelf

supports

Unscrew the ring nuts securing the shelf

supports (see diagram) and remove the

supports after sliding them out of their

retaining pins.

Warning

Always unplug the appliance before

removing the back panel.

To remove the back panel use a

screwdriver. This is a good opportunity to

clean the back of the rear panel.

Wash the panels with very hot water and a

detergent using a soft cloth.

If the shelf supports or the panels become

very soiled, use a standard caustic product

specially made for cleaning ovens.

The Oven Door

Before cleaning the oven door, we

recommend you to remove it from the oven.

Proceed as follows:

a) open the oven door completely;

b) find the hinges linking the door to the

oven ;

c) unlock and turn the small levers located

on the two hinges;

FO 0145

d) handle the door by its left- and right-hand

sides, then slowly turn it towards the

oven until it is half-closed;

e) gently pull the oven door off its site;

f) place it on a steady plan.

Clean the oven door glass with warm water

and a softh cloth only.

Once the cleaning is carried out, refit the

oven door, following the procedure in

reverse.

Advertising