Blanco BC 75 X - Manual (Page 21)

21
A stainless steel splash back is supplied
with the appliance. This is meant to be fitted
on the rear edge of the cooker's hob. The
splash back is inserted into the polystyrene
upper part of the package.
1. Carefully clean the hob top.
2. A foam rubber gasket is supplied into
the instruction book envelope.
3. After cleaning the hob from possible
grease and film residuals left, fix the
gasket on the rear part of the hob, paying
attention not to close the fan slots (Fig.
4).
4. Take the splash back out of the envelope
and remove the protective film.
5. Insert the splash back into the proper
hinges in the rear part of the hob (Fig.
5).
6. Fix the splash back with the supplied
screws (Fig. 6).
Splash back Assembly
Fig. 5
Fig. 6
Fig. 4 FO 2347
FO 2286
FO 2287