If something goes wrong – Blanco BC 75 X User Manual

Page 17

Advertising
background image

17

If something goes wrong

SYMPTOM

n The cooker does not operate.

n The gas ring burns unevenly

n The oven does not come on

n The oven temperature light does not come

on

n The oven light does not come on

n It takes too long to finish the dishes, or

they are cooked too fast.

n Steam and condensation settle on the

food and the oven cavity.

n The oven fan is noisy

SOLUTION

u

Check that the unit is plugged in and the

electrical supply is switched on

u

Check the mains fuse has not blown

u

Check the correct control knob has been

turned.

u

Check the main jet is not blocked and

the burner crown is clear of food particles.

u

Check the burner cap and crown have

been replaced correctly, e.g. after cleaning.

u

Check the oven is in manual operation

and that both a cooking function and tempe-

rature have been selected.

u

The socket switch or the switch from the

mains supply to the cooker are ON.

u

Select a temperature with the thermostat

control knob

u

Select a function with the oven function

control knob.

u

Select a function with the oven function

control knob

u

Check the light bulb, and replace it if

necessary (see "Replacing the Oven Light")

u

The temperature may need adjusting

u

Refer to the contents of this booklet,

especially to the chapter “Using the Oven”.

u

Leave dishes inside the oven no longer

than 15-20 minutes after the cooking is

completed.

u

Check that shelves and bakeware are not

vibrating in contact with the oven back panel.

For service, please contact your authorised local Service Agent giving full details of the

model, serial number and date of purchase. If you do not know who your local service

agent is, please call your local Sales office listed at the back of these instructions.
Please note that it will be necessary to provide proof of purchase for any in-guarantee

service calls.
In-guarantee customers should ensure that the above checks have been made as the

engineer will make a charge if the fault is not a mechanical or electrical breakdown.

Advertising