Pioneer DV-636D - Manual (Page 19)

19
MAKING CONNECTIONS
Video Connections
This player features S-video and composite, and
component video output possibilities.
Check the manual supplied with your TV or monitor to
determine the best possible connection for your system.
In addition to making physical connections to your TV or
monitor, it is also necessary to assign the TV screen size.
You can use the [Setup Navigator] in the Setup screen
General to set whether you are using a wide screen or
standard size TV or monitor (page 22). Additionally, you
can use the [TV Screen] setting in the Setup screen
Video menu (page 34).
S-VIDEO OUT
• Make S-video connections to a TV or monitor with S-
video input to produce a high quality video image.
• Use an S-video cable (not supplied) to connect one of
the S-VIDEO OUT jacks on the player to an
S-video input on the TV or monitor.
• When making S-video connections, make sure to set
the VIDEO OUT SELECT switch on the rear panel of
the player to the left to assign S-video output.
VIDEO OUT
• Make composite video connections to a standard TV
or monitor with a video input jack.
• Use the supplied video cord to connect one of the
VIDEO OUT jacks on the player to the video input on
the TV or monitor.
• Be sure to match the color of the plug with the color
of the jack (yellow).
• When making video connections, make sure to set the
VIDEO OUT SELECT switch on the rear panel of the
player to the left to assign composite video output.
TV or monitor
CONTROL OPT.
AUDIO OUT (2CH) AUDIO OUT (5.1CH)
AC IN
VIDEO OUT
NTSC PAL AUTO OUT IN
R
2 1
R
L L 1
2
1
2
FRONT SUB WOOFER
CENTER
TV SYSTEM
DIGITAL OUT
SURROUND
S-VIDEO OUT Y
PB
PR
COMPONENT VIDEO OUT
VIDEO OUT SELECT
S-VIDEO IN
1
2
S-VIDEO OUT
VIDEO
OUT
SELECT
TV it
CONTROL OPT.
AUDIO OUT (2CH) AUDIO OUT (5.1CH)
AC IN
VIDEO OUT
NTSC PAL AUTO OUT IN
R
2 1
R
L L 1
2
1
2
FRONT SUB WOOFER
CENTER
TV SYSTEM
DIGITAL OUT
SURROUND
S-VIDEO OUT Y
PB
PR
COMPONENT VIDEO OUT
VIDEO OUT SELECT
VIDEO
OUT
SELECT
VIDEO IN
VIDEO OUT
1
2
COMPONENT VIDEO OUT
• Make component video connections to a TV or
monitor with component inputs to produce a higher
quality video image.
• Use a component video cable or 3 video cords (not
supplied) to connect the COMPONENT VIDEO OUT
jacks on the player to the component jacks on the
monitor.
• When making component video connections, make
sure to set the VIDEO OUT SELECT switch on the
rear panel of the player to the right to assign
component video output.
CONTROL OPT.
AUDIO OUT (2CH) AUDIO OUT (5.1CH)
AC IN
VIDEO OUT
NTSC PAL AUTO OUT IN
R
2 1
R
L L 1
2
1
2
FRONT SUB WOOFER
CENTER
TV SYSTEM
DIGITAL OUT
SURROUND
S-VIDEO OUT Y
PB
PR
COMPONENT VIDEO OUT
VIDEO OUT SELECT
Y
P B
P R
COMPONENT
VIDEO IN
Y
P B
P R
COMPONENT
VIDEO OUT
VIDEO
OUT
SELECT
TV or monitor
TV or monitor