Pioneer DV-636D - Manual (Page 28)

28
1
Press STOP
7 (7 on the front panel).
Playback stops.
2
Press OPEN/CLOSE ( 0 on the front panel).
The disc tray comes out.
3
Remove the disc.
4
Press on the remote control to put the
player in standby.
The disc tray goes back in and the standby indicator
lights.
4 4
Press on the front panel ( on the
remote control). (Taiwanese model)
5
Press POWER on the front panel. (except
for Taiwanese model)
The player turns off.
Stopping Playback and Switching
Power Off
– DVD/Video CD/CD
0
4
¢
1 ¡ 7 8
3
Resuming Playback from
Where You Stopped
– DVD/Video CD
Use the resume feature to restart playback from the
point that the disc was stopped last time.
Press STOP
7 once.
The display shows “RESUME” and the stop position is
memorized.
• The resume position remains memorized as long as
the disc is in the player — even if you switch the
power off.
• Pressing STOP 7 twice causes the disc to return to
the beginning when PLAY
3 is pressed again. The
display shows the disc type (DVD or Video CD).
Press PLAY
3.
Playback starts from the resume position.
Notes
• The actual restart position may be slightly before or after
the resume position.
• If you want to remove the disc, but still want to resume
playback from the last stopped position, use the LAST
MEMORY feature instead (page 52).
+10 6 5 4
CLEAR 3 2 1
1 REV FWD ¡
PLAY 3 PAUSE 8 STOP 7
e STEP/SLOW E
NEXT
¢ PREV
4
RETURN
REPEAT
CONDITION
MEMORY
LAST
MEMORY
ANGLE SUB TITLE AUDIO
SETUP MENU TOP MENU
DISPLAY
¶
5
∞
3 2
¶
OPEN/
CLOSE
REPEAT
A-B
¶
¶ 5
5
5 5
EN TER
¶
¶
4, 4 4
1
2
CENTER SURROUND
AUDIO SUBTITLE FL DIMMER
SUB WOOFER 5.1CH
MODE 4 1 ¡ ¢
DVD PLAYER
3 7 8
0
Î FL OFF 5.1CH
VIRTUAL DOLBY DIGITAL
STANDBY VIRTUAL DOLBY
DIGITAL
DOLBY DIGITAL/DTS DECODER
POWER
ACOUSTIC DAMPER MECHANISM
– OFF - ON
1
3 2 4 4 , 5