Pioneer DV-636D - Manual (Page 22)

22
Setting the OSD Language
(On-Screen Display Language)
The [OSD Language] screen establishes the OSD
language, or on-screen display language, which refers to
the language that is used by the player in menus and
on-screen messages. Additionally, the language that is
established at this setting will also be used for the
default audio and subtitle language.
Settings: English*
français
Español
* Factory setting
Note
In addition to setting the [OSD Language], the audio and
subtitle language are also set at this time. If you wish to
change the audio or subtitle language to a different language,
make changes in the Setup screen Language menu [Audio
Language] and [Subtitle Language] as needed (page 35).
Setup Navigator
Move Exit SETUP Select ENTER
Select On Screen Language
OSD Language
Español
English Language
Audio1 Audio2 General Language Video
français
Audio1 Audio2 General Language Video
Setup Navigator
Move Exit SETUP Select ENTER
Widescreen TV
16:9 aspect ratio
TV Type
Standard (4:3)
Widescreen (16:9)
TV Connection
Setting the TV screen size
The [TV Type] screen establishes the size, or more
appropriately the width to height ration of your television
or monitor. The width-to-height ratio of conventional TVs
is 4:3, while the width-to-height ratio of wide screen and
high-definition TVs is 16:9. This width-to-height ratio is
called the aspect ratio.
Settings: Widescreen (16:9)*
Standard (4:3)
* Factory setting
Notes
• There are two screen formats that can be used to display
wide-screen format DVDs: letter box and pan & scan.
When [Standard (4:3)] is selected in the Setup Navigator,
the letter box screen format is automatically selected. To
switch the preference to the pan & scan format, make
changes in the Setup screen Video menu [TV Screen]
setting (page 34).
• When [Standard (4:3)] is selected in the Setup Navigator,
Linear PCM digital audio playback is output is automatically
downsampled to 48 kHz (when the original signal is 96
kHz). In order to hear audio at the sampling rate of 96 kHz,
set the Setup screen Video menu [TV Screen] setting to
either [16:9 (Wide)] or [4:3 (Pan & Scan)] (page 34).
Additionally, make sure that your system is set up to output
the 96 kHz bitstream using either the Setup Navigator or
the Setup screen Audio 1 menu [96kHz PCM Out] setting
(pages 24, 31).