Pioneer DV-636D - Manual (Page 24)

24
Audio1 Audio2 General Language Video
Setup Navigator
Move Exit SETUP Select ENTER
Confirm setup adjustments
Exit Setup Navigator
Start Again
Delete Changes
Save Changes
Confirming the settings
The [Exit Setup Navigator] is the final screen in the
Setup Navigator.
Settings: Save Changes*
Select to have the player make all of the
necessary audio, video and language settings
according to your responses in the Setup
Navigator.
Delete Changes
Select to exit the Setup Navigator without
changing any of the system settings.
Start Again
Select to return to the [OSD Language]
screen of the Setup Navigator and do the
settings again.
* Factory setting
To exit the Setup screen
When you have completed setting up the player using
the Setup Navigator or if you exit the Setup Navigator,
the Setup screen General menu appears. Press SETUP
to close the Setup screen.
To change other player settings in the Setup
screen menus
The procedure for changing the settings in the Setup
screen menus is described on page 29.
Setting digital audio connections
to an AV amplifier or decoder
The [Digital Jack] screen establishes whether digital
connections have been made to an AV amplifier,
receiver, or external decoder. As there are numerous
options available, please refer to the instructions
supplied with the component the player is connected to
to determine what digital audio formats can be decoded.
If you have made no digital connections, select [Not
Connected].
Settings: Dolby Digital*
Dolby Digital/DTS
Dolby Digital/MPEG
Dolby D/DTS/MPEG
PCM
Not Connected
* Factory setting
Setting compatibility with 96 kHz
output
The [96 kHz PCM Audio] screen establishes whether or
not the AV component the player is connected to is
capable of processing an audio signal with a sampling
rate of 96 kHz. This screen only appears if connections
have been made to an external AV component as
determined in previous screens.
Settings: No*
Select if the connected AV component
cannot process an audio signal with a
sampling rate of 96 kHz.
Yes
Select if the connected AV component can
process an audio signal with a sampling rate
of 96 kHz.
Don’t Know
Select if you are uncertain whether the
connected AV component can process an
audio signal with a sampling rate of 96 kHz.
* Factory setting
Note
When a DVD is played back in the letter box format, 96 kHz
Linear PCM digital audio playback is automatically
downsampled to 48 kHz. In order to hear audio at the
sampling rate of 96 kHz, set the Setup screen Video menu
[TV Screen] setting to either [16:9(Wide)] or [4:3 (Pan &
Scan)] (page 34).
Audio1 Audio2 General Language Video
Setup Navigator
Move Exit SETUP Select ENTER
Compatible with Dolby Digital
Digital Jack
Not Connected
Dolby D/DTS/MPEG
Dolby Digital/MPEG
Dolby Digital/DTS
PCM
Dolby Digital
Amp Connection
Audio1 Audio2 General Language Video
Setup Navigator
Move Exit SETUP Select ENTER
Digital jack not compatible with 96 kHz
96 kHz PCM Audio
Don't Know
Yes
No Amp Connection