Pioneer DV-636D - Manual (Page 23)

23
SETTING UP THE PLA
YER
To coordinate your speaker system for 5.1
channel output
When [5.1 Channel] is selected in the [Analog Jacks]
screen, the following screens appear to determine the
configuration of your speaker system. In all of the
following screens, select [Present] if the speaker in
question is present in your system, and [Not Present] if
it is not.
[Center Speaker]
[Surround Speakers]
[Sub-woofer]
Settings: Present*
Not Present
* Factory setting
Note
If [Not Present] is selected for both [Center Speaker] and
[Surround Speaker], [Sub-woofer] is automatically set to
[Not Present] and the [Sub-woofer] screen is not displayed.
Audio1 Audio2 Language Video
Setup Navigator
Move Exit SETUP Select ENTER
Surround speakers are connected
to an amplifier
Surround Speaker
Not Present
Present
Amp Connection
General
Audio1 Audio2 General Language Video
Setup Navigator
Move Exit SETUP Select ENTER
Center speaker is connected
to an amplifier
Center Speaker
Not Present
Prese Present
Amp Connection
Audio1 Audio2 Language Video
Setup Navigator
Move Exit SETUP Select ENTER
Sub-woofer is connected
to an amplifier
Sub-woofer
Not Present
Prese Present
Amp Connection
General
Setting analog audio connections
to an AV amplifier or receiver
The [Analog Jacks] screen establishes whether analog
connections have been made to an AV amplifier or
receiver, and if connections are made, whether the
connections made are for 2 channel stereo or for 5.1
channel surround sound.
Settings: 2 Channel*
Select if you have made 2 channel
connections to an amplifier or receiver.
5.1 Channel
Select if you have made 5.1 channel
connections to an AV amplifier or receiver
with the appropriate inputs. When this
setting is selected, several screens will
follow to determine the configuration of your
speaker system. These screens are
described in the section
‘To coordinate your
speaker system for 5.1 channel output’ on
this page.
Not Connected
Select if you have not made connections to
an amplifier or receiver or if you have made
stereo connections to a TV or monitor.
* Factory setting
Audio1 Audio2 General Language Video
Setup Navigator
Move Exit SETUP Select ENTER
2 CH jacks for L/R
Analog Jacks
Not Connected
5.1 Channel
2 Channel Amp Connection