Pioneer AVIC-HD1BT - Manual (Page 142)

140
Ch
ap
te
r
14
Cu
st
om
isin
g t
h
e A
u
d
io
S
et
tin
g re
la
te
d
wi
th
A
u
d
io
V
is
u
al
AV
❒ The navigation system automatically switches
between NTSC colour system and PAL colour
system for each video and outputs the video
on the “Rear Display”. To correctly output
each type of video on the “Rear Display”, we
recommend using a “Rear Display” with a
function to automatically switch between
NTSC and PAL (e.g. AVD-W1100V).
1
Touch the source icon and then touch
[REAR SCREEN].
Each touch of [REAR SCREEN] changes the
settings as follows:
• MIRROR – The video on the front screen of
the navigation unit is output to the “Rear
display”
• DVD – The video and sound of the DVDs
are output to the “Rear display”
• AV – The video and sound of the AV
INPUT are output to the “Rear display”
❒ When MIRROR is selected, the following
restrictions are applied to “Rear display”.
– The TV tuner connected with AV-BUS, its
“Video image” cannot be output. (Connect
with TV tuner’s rear output to “Rear display”
directly.)
– When selecting Rear View in the map dis-
play, nothing is displayed.
– All sounds cannot be output for “Rear dis-
play”.
– There is no picture on “Rear display” while
[Picture Adjust] for [Back-Camera] is car-
ried out.
– The map screen navigation images output to
the “Rear display” differ from standard NTSC
format images. Therefore, their quality will be
inferior to the images that appear on the front
screen.
❒
When DVD is selected, the following
restrictions are applied to “Rear display”.
– When the CD or MP3 disc is set in the built-
in DVD drive, nothing is output.
❒
When AV is selected, the following restric-
tions are applied to “Rear display”.
– The “Video image” and sound are output
only when the AV INPUT has them.
– The “Video image” and sound are output
only when the appropriate setting on [AV
Input] is [Video].
Operating the picture adjust-
ment
• For safety reasons, these functions are not
available while your vehicle is in motion.
To enable these functions, you must stop
in a safe place and put on the handbrake
before setting your route (see page 14
Interlock for details).
You can adjust for each source and rear view
camera.
1
Press the V button to display Picture
Adjust screen.
• Brightness – Adjusts the black intensity
• Contrast – Adjusts the contrast
• Color – Adjusts the colour saturation
• Hue – Adjusts the tone of colour (red is
emphasized or green is emphasized)
• Dimmer – Adjusts the brightness of display
• Back-Camera – Shows the picture adjust-
ment display for the rear view camera
❒ Touching [Source] while adjusting the
rear view camera image returns you to the
previous screen.
❒ The adjustments of Brightness, Contrast
and Dimmer are stored separately when
your vehicle is headlight is on (daytime)
and when your vehicle’s headlight is off
(nighttime). These are switched automati-
cally depending on the condition of the
vehicle’s headlight.
❒ You cannot adjust Color and Hue for the
source without a video and navigation map
display.
❒ The setting contents can be memorised
separately for the following screen and the
“Video image”.
– AM/FM/M-CD/iPod/AUX screen
– LIBRARY (Music Library) screen
– Built-in DVD drive
– TV image
MAN-HD1BT-SOFTW-EN.book Page 140 Thursday, April 20, 2006 3:47 PM