Pioneer AVIC-HD1BT - Manual (Page 94)

92
Ch
ap
te
r
10
U
si
n
g
t
h
e AV
S
ou
rc
e (B
ui
lt
-i
n DV
D
Dri
ve a
n
d
R
ad
io
)
AV
❒ Playback is carried out in order of file number.
Folders are skipped if they contain no MP3
files. (For example, if folder 01 (ROOT) con-
tains no MP3 files, playback commences with
folder 02.)
❒ When playing back files recorded as VBR (var-
iable bit rate) files, the play time will not be
correctly displayed if fast forward or reverse
operations are used.
❒ If you are using a folder that does not contain
an MP3 file, the folder itself will display but
you will not be able to see or play any files in
that folder.
❒ The maximum number of characters are 32
characters including extension (.mp3). But
the navigation system incorporates the pro-
portional font. Therefore, the number of the
characters which you can display varies
according to which of each character.
❒ If the built-in DVD drive does not operate prop-
erly, an error message may be displayed.
➲ Error messages ➞ Page 176
❒ Playing MP3 file on the DVD-R (-RW) is not
supported.
Operating the DVD
• For safety reasons, “Video image” cannot
be viewed while your vehicle is in motion.
To view “Video image”, you must stop in a
safe place and put on the handbrake
before setting your route (see page 14
Interlock for details).
You can play a DVD-Video using the built-in DVD
drive of the navigation system. This section
describes operations for DVD-Video.
Selecting [DVD] as the source
1
Press the OPEN CLOSE button and insert
a disc you want to play to disc loading
slot.
The source changes and then playback will
start.
❒
If the disc is already set, touch the source
icon and then touch [DVD].
➲ For details, refer to “Selecting a source” ➞
Page 85
❒ Also see at “Handling and Care of the Disc”
and “Playable discs” in the Hardware Manual
for more cautions about handling DVD-Video.
Screen configuration
(1) Source icon
Shows which source has been selected.
(2) Sound output indicator
Shows which sound output setting has been
selected.
(3) Repeat range indicator
Shows which repeat range has been selected.
(1) (4)(6) (5) (7) (3) (8)
(9)
(2)
MAN-HD1BT-SOFTW-EN.book Page 92 Thursday, April 20, 2006 3:47 PM