Pioneer AVIC-HD1BT - Manual (Page 176)

174
Appe
n
d
ix
NA
V
I/
A
V There are currently no TMC providers
available.
The system cannot tune to the
selected provider for some reason
and cannot found any other provid-
ers.
Move to the location where you can
receive another RDS-TMC provider,
and then try the operation again.
There is no pictures folder. Please
create /Pictures/ folder and store
JPEG files in that Folder.
Cannot load the image because the
Pictures folder is not found in the
inserted disc.
Use the appropriate data after read-
ing “Limitations for import the pic-
ture” on page 83.
“Service provider name” is currently
unavailable.
The system cannot tune to the
selected provider for some reason.
• Select another provider.
• Move to the location where you can
receive the selected provider, and
then try the operation again.
Data Read error. Failed to read the data because the
CD-R is damaged or dirty. Or, the
pick-up lens of the DVD drive is dirty.
Try re-reading the data by inserting a
clean CD-R.
Clean the pick-up lens with a com-
mercially available cleaning kit for
DVD, then try to reading again.
The Pictures folder exists on the CD-
R but no data in JPEG format exists.
Use the appropriate data after read-
ing “Limitations for import the pic-
ture” on page 83.
JPEG file is corrupt. The data is damaged or an attempt
was made to set a JPEG image, that
is out of specifications, as the back-
ground picture.
Use the appropriate data after read-
ing “Limitations for import the pic-
ture” on page 83.
Connection failed. The mobile phone’s Bluetooth wire-
less technology is turned off.
Turn the target phone’s Bluetooth
wireless technology on.
The mobile phone is pared (con-
nected) with another device.
Cancel the paring (connection) and
retry.
Rejection by the mobile phone has
received.
Operate target phone and accept the
connection request from the naviga-
tion system. (Furthermore, check the
setting related connection on your
mobile phone.)
The target mobile phone can not be
found.
Check whether your mobile phone is
turned off or not, whether the dis-
tance to your mobile phone is too far
or not.
Registration step has been success-
ful but connection is fail for some
reason.
Retry the registration and if a con-
nection still cannot be established,
try connecting using your mobile
phone.
Registration failed. The mobile phone’s Bluetooth wire-
less technology is turned off during
the registration step.
Keep turning the target phone’s
Bluetooth wireless technology on
during the registration.
Rejection by the mobile phone has
received.
Operate target phone and accept the
registration request from the naviga-
tion system. (Furthermore, check the
setting related connection on your
mobile phone.
Registration step is fail for some rea-
son.
Retry the registration and if a regis-
tration still cannot be failed, try regis-
tering using your mobile phone.
Automatic connection in progress.
Please try again later.
If you try to perform another opera-
tion during automatic connection by
the system.
• Wait for a while and retry.
• Establish that connection tempo-
rarily and retry that later.
Automatic connection in progress.
Please try manually later.
If you try to connect another phone
during automatic connection by the
system.
Establish that connection temporar-
ily and retry that later.
Message When What to do
MAN-HD1BT-SOFTW-EN.book Page 174 Thursday, April 20, 2006 3:47 PM