Editing the phone book data – Pioneer AVIC-HD1BT User Manual
Page 76
74
Cha
p
te
r
8
Usin
g Ha
n
d
s-
fr
ee
P
h
o
n
in
g
NA
V
I
Editing the Phone Book data
You can edit the imported phone book data or
add new data. You can edit [Name], [Phone #],
or [Picture]. You can also delete unnecessary
data.
❒
The data cannot be transferred back to the
mobile phone.
Adding new data
1
Touch [Info/Phone] in the Navigation
menu, and then touch [Phone Menu].
2
Touch [Phone Book].
3
Touch
or [Add].
The edit screen appears.
❒
To add data by entering it as desired, touch
[Add].
4
Select the entry you want to edit.
[Name] or [Phone #]:
Enter the name and the phone number to be
displayed in the phone book. Touch [OK] to
complete the input and return to the previous
screen.
➲
About Keypad Operation ➞ Page 20
❒
The name can be input 40 characters long
and phone number can be input 32 char-
acters long.
❒
The edited names and phone numbers are
reflected to the dialled number history and
the received call history. However, they are
not reflected to the data registered in [Dial
Favourite].
[Picture]:
Sets the image to be displayed when a call is
received.
➲
“Customising the incoming call picture for
a phone book entry” ➞ Page 74
5
Touch [OK].
The selected data is added to the phone book.
Customising the incoming call picture
for a phone book entry
You can customise a picture for the phone book
record. Some pictures are already stored in the
hard disk drive, and you can also import JPEG for-
mat pictures, such as a picture on your digital
camera by using CD-R(-RW). If you burn the pic-
tures into a CD-R (-RW) by your PC and insert
that to the navigation system, you can use them.
Here, a method for changing the picture is
described with an example of loading a picture
stored on a CD-R (-RW) onto the navigation sys-
tem.
1
Check that no disc is inserted, and insert
your CD-R (-RW) to the disc loading slot.
2
Touch [Picture], and then touch [Import
from Disc].
The list of the pictures stored in a CD-R (-RW)
is displayed.
On this screen, you can select the following
item:
Back to Original:
The picture originally used when the system
was purchased is selected.
❒
Touching other than [Import from Disc]
allows you to select a background image
stored on the hard disk drive.
3
Touch a picture you want to set.
4
Touch [Yes].
On this screen, you can select the following
items:
No:
This is selected when you want to change to
another picture. Return to Step 3.
Be sure to read “Limitations for import the pic-
ture” before creating the CD-R (-RW).
➲
“Limitations for import the picture” ➞
Page 83
MAN-HD1BT-SOFTW-EN.book Page 74 Thursday, April 20, 2006 3:47 PM