Pioneer N-30-K - Manual (Page 13)

Bluetooth ® Audio playback(optional) 05
13
En
English
Français
Español
Chapter 5:
Bluetooth
®
Audio playback
(optional)
Music playback using Bluetooth
wireless technology
When the Bluetooth ® adapter (Pioneer Model No. AS-
BT200) is connected to this unit, a product equipped
with Bluetooth wireless technology (portable cell phone,
digital music player, etc.) can be used to listen to music
wirelessly. Also, by using a commercially available
transmitter supporting Bluetooth wireless technology,
you can listen to music on a device not equipped with
Bluetooth wireless technology. The AS-BT200 model
supports SCMS-T contents protection, so music can also
be enjoyed on devices equipped with SCMS-T type
Bluetooth wireless technology.
Note
• The Bluetooth wireless technology enabled device
must support A2DP profiles.
• Pioneer does not guarantee proper connection and
operation of this unit with all Bluetooth wireless
technology enabled devices.
• The Bluetooth ® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use
of such marks by PIONEER CORPORATION is under
license. Other trademarks and trade names are those
of their respective owners.
Remote control operation
The remote control supplied with this unit allows you to
play and stop media, and perform other operations.
• The Bluetooth wireless technology enabled device
must support AVRCP profiles.
• Remote control operations cannot be guaranteed
for all Bluetooth wireless technology enabled
devices.
Connecting optional Bluetooth ®
adapter
1 Connect the Bluetooth ®
adapter to the
unit when the unit is in the standby mode.
• To connect the Bluetooth ® adapter, see Connecting
optional Bluetooth® adapter on page 7.
2 Press  STANDBY/ON to turn the
power on.
3 Press Bluetooth on the remote control
to select BT Audio as the input source.
You can also perform the same operation by pressing the
FUNCTION
on the front panel repeatedly.
NETW ORK PLA YE R
ST ANDBY ON DISPL AY
REPEA T
SHUFFLE SETUP ENTER HOME MENU PU RE A UDIO
SOUND RET URN Hi-Bit
iP od USB-A USB-B 1 4 7 CLEAR
V TUNER
   
Blue tooth AirJa m 2 5 8 0
M USIC
SER VER DIG ITA L 1 DIGIT AL 2 3 6 9 ENTER
Remote control operation
This unit
Bluetooth ®
adapter
Device not equipped with Bluetooth
wireless technology:
Digital music player
+
Bluetooth ® audio transmitter
(commercially available)
Bluetooth wireless technology
enabled device:
Digital music player
Bluetooth wireless technology
enabled device:
Cell phone
• When the Bluetooth ® adapter is not connected and
BT Audio is selected as the input source, the error
message BT Adapter Not Connected will be
shown on the display.
Setting the PIN code
Set this unit’s PIN code to the same setting as that for
the Bluetooth wireless technology device used.
Supported PIN code setting values include 0000, 1234 or
8888.
• Default setting: 0000
1 Press Bluetooth on the remote control
to select BT Audio as the input source.
You can also perform the same operation by pressing the
FUNCTION
on the front panel repeatedly.
BT Audio is shown on the display.
2 Press SETUP.
3 Use / to select Option Setting 
BT PIN Select, then press ENTER.
4 Use / to select the PIN code, then
press ENTER.
The PIN code is stored.
Pairing Bluetooth ® adapter and
Bluetooth wireless technology device
“Pairing” must be done before you start playback of
Bluetooth wireless technology content using Bluetooth ®
adapter. Make sure to pair devices the first time you
operate the system or any time pairing data is cleared.
“Pairing” is the step necessary to register Bluetooth
wireless technology device to enable Bluetooth
communications. For more details, see also the
operating instructions of your Bluetooth wireless
technology device.
1 Press Bluetooth on the remote control
to select BT Audio as the input source.
You can also perform the same operation by pressing
the FUNCTION on the front panel repeatedly.
BT Audio
is shown on the display.
2 Turn on the Bluetooth wireless
technology device that you want to make
pairing, place it near the system and set it
into the pairing mode.
Pairing starts.
3 Check to see that the Bluetooth ®
adapter is detected by the Bluetooth
wireless technology device.
• If the Bluetooth wireless technology device cannot
be connected to the unit, perform the connection
operation from the Bluetooth wireless technology
device.
Note
• Pairing is required when you first use Bluetooth
wireless technology device and Bluetooth ®
adapter.
• To enable Bluetooth communication, pairing
should be done with both of your system and
Bluetooth wireless technology device.


BT PIN Select
Internet Parental Lock
Power Off Setting
Language
Option Setting
N-50-K_En.book 13 ページ ２０１１年９月２１日 水曜日 午後９時１２分