Pioneer N-30-K - Manual (Page 23)

Additional information 10
23
En
English
Français
Español
The audio files stored on
components on the
network, such as a PC,
cannot be played back.
Windows Media Player 11 or
Windows Media Player 12 is not
currently installed on your PC.
Install Windows Media Player 11 or Windows Media Player
12 on your PC (page 17).
Audio files were recorded in formats
other than MP3, WAV (LPCM only),
MPEG-4 AAC, FLAC, and WMA.
Play back audio files recorded in MP3, WAV (LPCM only),
MPEG-4 AAC, FLAC, or WMA. Note that some audio files
recorded in these formats may not be played back on this
unit.
Audio files recorded in MPEG-4 AAC
or FLAC are being played back on
Windows Media Player 11 or
Windows Media Player 12.
Audio files recorded in MPEG-4 AAC or FLAC cannot be
played back on Windows Media Player 11 or Windows
Media Player 12. Try using another server. Refer to the
operation manual supplied with your server.
The component connected to the
network is not properly operated.
Check whether the component is affected by special
circumstances or is in the sleep mode. Try rebooting the
component if necessary.
The component connected to the
network does not permit file sharing.
Try changing the settings for the component connected to
the network.
The folder stored on the component
connected to the network has been
deleted or damaged.
Check the folder stored on the component connected to the
network.
Network connections could be
restricted due to the computer’s
network settings, security settings,
etc.
Check the computer’s network settings, security settings,
etc.
Cannot access Windows
Media Player 11 or
Windows Media Player 12.
In case of Windows Media Player 11:
You are currently logged onto the
domain through your PC with
Windows XP or Windows Vista
installed.
In case of Windows Media Player 12:
You are currently logged onto the
domain through your PC with
Windows 7 installed.
Instead of logging onto the domain, log onto the local
machine (page 17).
Problem Check Remedy
Audio playback is
undesirably stopped or
disturbed.
The audio file currently being played
back was not recorded in a format
playable on this unit.
Check whether the audio file was recorded in a format
supported by this unit.
Check whether the folder has been damaged or corrupted.
Even audio files listed as playable on this unit may
sometimes not be played back or displayed (page 25).
The LAN cable is currently
disconnected.
Connect the LAN cable properly (page 7).
There is heavy traffic on the network
with the Internet being accessed on
the same network.
Use 100BASE-TX to access the components on the network.
There is a connection routed through
a wireless LAN on the same network.
There may be a shortage of bandwidth on the 2.4 GHz band
used by the wireless LAN. Make wired LAN connections not
routed through a wireless LAN.
Install away from any devices emitting electromagnetic
waves on the 2.4 GHz band (microwave ovens, game
consoles, etc.). If this does not solve the problem, stop using
other devices that emit electromagnetic waves.
Cannot listen to Internet
radio stations.
The firewall settings for components
on the network are currently in
operation.
Check the firewall settings for components on the network.
You are currently disconnected from
the Internet.
Check the connection settings for components on the
network, and consult with your network service provider if
necessary (page 7).
The broadcasts from an Internet
radio station are stopped or
interrupted.
Some Internet radio stations on the list of Internet radio
stations for this unit may occasionally not be available for
listening.
Problem Check Remedy
N-50-K_En.book 23 ページ ２０１１年９月２１日 水曜日 午後９時１２分