Pioneer N-30-K - Manual (Page 8)

Connections 02
8
En
Connecting using wireless LAN
Wireless connection to the network is possible through
a wireless LAN connection. Use the separately sold
wireless LAN converter (Pioneer Model No. AS-WL300)
for connection.
Note
• Use only the furnished accessory connecting cable.
• For instructions on setting the wireless LAN
converter, refer to the operating instructions for the
AS-WL300.
Plugging in
Important
• Before making or changing the connections,
switch off the power and disconnect the power cord
from the AC outlet.
Caution
• Do not use any power cord other than the one
supplied with this unit.
• Do not use the supplied power cord for any purpose
other than that described below.
After you’ve finished making all connections, plug the
unit into an AC outlet.
1 Plug the supplied power cord into the
AC IN socket on the back of the unit.
2 Plug the other end into a power outlet.
WAN
DC 5V WPS Ethernet
DIGITAL OUT
OPTICAL COAXIAL OPTICAL COAXIAL
1 2
DIGITAL IN
DIGITAL IN
ADAPTER PORT
LAN (10/100) DC OUTPUT for WIRELESS LAN
USB
(OUTPUT 5V 0.1A MAX)
(OUTPUT 5V 0.6A MAX)
Internet
Modem
Wireless LAN
Router
Wireless LAN converter (AS-WL300)
(commercially available)
AC IN
To AC outlet
Power cord
N-50-K_En.book 8 ページ ２０１１年９月２１日 水曜日 午後９時１２分