Pioneer N-30-K - Manual (Page 7)

Connections 02
7
En
English
Français
Español
Connecting optional Bluetooth®
adapter
Connect the Bluetooth ® adapter (Pioneer Model No.
AS-BT200) to ADAPTER PORT terminal on the rear
panel.
Important
• Do not move the unit with the Bluetooth ADAPTER
connected. Doing so could cause damage or faulty
contact.
• For instructions on playing the Bluetooth wireless
technology device, see Bluetooth® Audio playback
(optional) on page 13.
Using a USB cable to connect to a
computer
N-50 only:
By using a USB cable (sold separately) to connect this
unit’s DIGITAL IN USB port to the USB port on a
computer, this unit can be used as a D/A converter.
For details regarding the output of signals input to the
DIGITAL IN USB
port, see section Playing music from a
computer on page 18.
Important
• When using this connection to input audio files
from a computer to this unit, it may be necessary to
install a special driver on the computer. For details,
see the website of Pioneer.
Note
• This unit cannot be used to play audio files from a
computer unless Media Player is installed on the
connected computer.
AL OUT
COAXIAL OPTICAL COAXIAL
1 2
DIGITAL IN
DIGITAL IN
ADAPTER PORT
DC OUTPUT for WIRELESS LAN
USB
(OUTPUT 5V 0.1A MAX)
(OUTPUT 5V 0.6A MAX)
AC IN
Bluetooth ® adapter (commercially available)
AL OUT
COAXIAL OPTICAL COAXIAL
1 2
DIGITAL IN
DIGITAL IN
ADAPTER PORT
DC OUTPUT for WIRELESS LAN
USB
(OUTPUT 5V 0.1A MAX)
(OUTPUT 5V 0.6A MAX)
AC IN
USB
USB cable
(commercially available) A-type
B-type
PC
Connecting to the network through
the LAN interface
By connecting this unit to the network via the LAN
interface, you can play back audio files stored on
components on the network, including your PC, and
listen to Internet radio stations.
Connect the LAN terminal on this unit to the LAN
terminal on your router (with or without the built-in
DHCP server function) with a straight LAN cable (CAT 5
or higher).
Turn on the DHCP server function of your router. If your
router does not have a built-in DHCP server function, you
have to set up the network manually. For details, see
page 19.
Note
• In order to connect to the Internet, you must
conclude a contract with an Internet Service
Provider (ISP).
• To listen to Internet radio stations, you must sign a
contract with an ISP (Internet Service Provider)
beforehand.
• Photo or video files cannot be played back.
• With Windows Media Player 11or 12, you can even
play back copyrighted audio files on this unit.
Connecting using LAN cable
DIGITAL OUT
OPTICAL COAXIAL OPTICAL COAXIAL
1 2
DIGITAL IN
DIGITAL IN
ADAPTER PORT
LAN (10/100) DC OUTPUT for WIRELESS LAN
USB
(OUTPUT 5V 0.1A MAX)
(OUTPUT 5V 0.6A MAX)
WAN 3 2 1
LAN
Internet
Modem
Router
PC2 PC1
LAN cable
(commercially
available)
N-50-K_En.book 7 ページ ２０１１年９月２１日 水曜日 午後９時１２分