Pioneer N-30-K - Manual (Page 9)

Part names and functions 03
9
En
English
Français
Español
Chapter 3:
Part names and functions
Remote control
1  STANDBY/ON
This button operates when the unit’s main
/I STANDBY/ON button is set to ON. Each time this
button is pressed, the unit’s status alternates between
ON
and STANDBY modes.
2 Function buttons
Use to change the input source.
• DIG IN 1, DIG IN 2 and DIG IN USB functions are
supported only by the N-50.
3 Number buttons (0 to 9)
These are used to input numbers for network and other
settings.
4 CLEAR
Press to clear the selected item.
Use this for example if you input the wrong number.
5 
Press to start playback. During playback, pause/
unpause playback.
6 
Press to return to the beginning of the currently playing
file.
• Depending on the input function selected, it may
not be possible to return to the beginning of the
currently playing file.
7 SHUFFLE
Perform shuffle play of files on the selected iPod/iPhone/
iPad, USB storage device or Music Server (page 11, 12,
17).
8 ///
Use these to select items, change settings and
move the cursor.
ENTER
Use this to implement the selected item or enter a
setting that you have changed.
9 SETUP
Use this to change the settings such as Display Setting
(page 19), Network Setting (page 19), Option Setting
(page 20) and see System Info (page 19).
This button is also used to reinitialize unit settings as
described in the section Reset (page 20).
NETWORK AUDIO PLAYER
STANDBY/ON DISPLAY
REPEAT SHUFFLE
SETUP
ENTER
HOME MENU
PURE AUDIO
SOUND
RETURN
Hi-Bit 32
iPod
USB
DIG IN USB
1
4
7
CLEAR
  

Bluetooth
DIG IN 1
2
5
8
0
MUSIC SERVER INTERNET RADIO
Air Jam
DIG IN 2
3
6
9
ENTER
12
13
18
17
15
16
14
19 11
10
2
3
4
5
6
7
8
9
1
10 HOME MENU
Select and play the file from the menu screen.
11 PURE AUDIO (N-50 only)
Press this button to activate the PURE AUDIO mode. In
this mode, audio playback is performed with greatest
fidelity to the original sounds (page 18).
12 DISPLAY
Press to turn the display off when you do not need it.
When an action is performed on the unit, the display will
automatically light, then turn off again after ten seconds.
Press the button once again to cancel the Display OFF
mode.
13 ENTER
Press to enter the selected item.
14 
Press during playback to skip ahead to the beginning of
the next file.
15 REPEAT
Perform repeat play of files on the selected iPod/iPhone/
iPad, USB storage device or Music Server (page 11, 12,
17).
16 
Press to stop playback.
17 SOUND (N-50 only)
Turns Auto Sound Retriever, Auto Level Control,
Hi-Bit 32
and Sound Retriever Air on and off (page 18).
• Sound Retriever Air can be set only when the
Bluetooth or Air Jam functions have been
selected.
18 RETURN
Press to return to the previous screen. Also, use to
cancel the sound setting.
19 Hi-Bit 32 (N-50 only)
Press this button to turn on the SOUND mode’s
Hi-Bit 32
function. This expands the dynamic range (and
frequency direction band) for digital audio signals,
producing smoother and more detailed playback
(page 18).