Speaker distance, The system and the other setup 11, Receiver – Pioneer VSX-1019AH-K User Manual

Page 96

Advertising
background image

The system and the other setup

11

96

En

3

Confirm your selected setup option.

The test tones will start after you press ENTER.

4

Adjust the level of each channel using

/

.
If you selected MANUAL, use

/ to switch

speakers. The AUTO setup will output test
tones in the order shown on-screen:

Adjust the level of each speaker as the test tone
is emitted.

1

5

When you’re finished, press RETURN.

You will return to the Manual SP Setup menu.

Tip

• You can change the channel levels at any

time by press ,

then

press CH

LEVEL, and then using

/ on the

remote control.

Speaker Distance

For good sound depth and separation from
your system, you need to specify the distance
of your speakers from the listening position.
The receiver can then add the proper delay
needed for effective surround sound.

1

Select ‘Speaker Distance’ from the

Manual SP Setup menu.

2

Adjust the distance of each speaker using

/.
You can adjust the distance of each speaker in
0.01 m increments.

3

When you’re finished, press RETURN.

You will return to the Manual SP Setup menu.

Tip

• For best surround sound, make sure the

surround back speakers are the same
distance from the listening position.

Note

1 • If you are using a Sound Pressure Level (SPL) meter, take the readings from your main listening position and adjust

the level of each speaker to 75 dB SPL (C-weighting/slow reading).
• The subwoofer test tone is output at low volumes. You may need to adjust the level after testing with an actual
soundtrack.

CAUTION

Loud test tones will be output.

Please wait...**

4a3.Channel Level

A/V RECEIVER

Exit

Cancel

A/V RECEIVER

Exit

Finish

MCACC : M1.MEMORY 1

L :

0.00

dB

4a3.Channel Level

C :

0.00

dB

R :

0.00

dB

SBR : 0.00

dB

SR :

0.00

dB

SBL : 0.00

dB

SL :

0.00

dB

SW :

0.00

dB

RECEIVER

1. Surr Back System
2. Speaker Setting
3. Channel Level

4. Speaker Distance

5. X-Curve

4a.Manual SP Setup

A/V RECEIVER

Exit

Return

A/V RECEIVER

Exit

Finish

MCACC : M1.MEMORY 1

L :

3.61m

4a4.Speaker Distance

C :

3.69m

R :

3.67m

SBR : 5.77m

SR :

2.74m

SBL : 5.13m
SL :

2.26m

SW : 3.54m

VSX-1019_SVYXJ.book 96 ページ 2009年2月17日 火曜日 午前11時13分

Advertising
This manual is related to the following products: