Pioneer PDP-LX5090 - Manual (Page 39)

Enjoying DTV broadcasts 09
39
En
E
n
glish Chapter 9
Enjoying DTV broadcasts
Watching DTV programmes
Digital TV (DTV) not only replaces the conventional analogue TV
channels, but also provides more channels, clearer picture quality,
and various types of useful information. It also provides various
features, including subtitling and multiple audio tracks.
Caution
• The compatibility of this product with digital terrestrial services
has been fixed - details described in the product specifications
- at the time of its introduction.
Note
• When executing Auto Installation (page 27), make sure to select
“Digital” or “All” as the tuner type.
• Selecting the DTV mode when no channels yet searched will
only display “DTV Setup” screen with only the item “Installation”
selectable.
• While in the DTV mode, press m to display the Teletext screen
(except in UK).
Changing channels
1 Press TV/DTV to select the DTV mode.
2 Press ENTER to call up the Channel List screen.
3 Select a channel ( / then ENTER).
You can also select channels by pressing buttons 0 to 9 or P+/P– on
the remote control unit.
Note
• While in DTV mode, press 001 to access channel 1 (one-digit
channel) quickly. You can, however, select the channel 1 by
pressing
01 or 1 but have to wait for two seconds since the last
digit input. The same applies for two-digit channels.
• P+/P– cannot pick up channels that are set to skip or not
registered as favourites (with the Favourite function set to “On”.
For favourite channels, see page 42.).
• If the channel is locked, you must enter the correct password
each time (see page 57).
• While receiving DTV radio channels, the screen saver
automatically starts when no operation is done for three
minutes.
Viewing a channel banner
A channel banner shows programme names, start/end time of
programmes and other channel information.
1 Press TV/DTV to select the DTV mode.
2 Press p.
A channel banner appears.
To display information about other channels, press /.
To tune into the channel selected on the banner, press ENTER.
The channel banner also displays icons for Favourites ( ),
Subtitles ( [) and Teletext (m) if they apply to the selected
channel.
To quit banner display, press EXIT.
3 To view more detailed programme information, press p
again.
To switch between Now and Next programme information, press /
.
To display detailed information about other channels, press
/.
To tune into the channel selected on the banner, press ENTER.
To quit display of detailed information, press RETURN.
To quit display of all the banners, press EXIT.
If the banner contains further information, “More” is displayed.
Press the
BLUE button to view the entire information.
Note
• Banner information is updated every minute.
• Some programmes may not provide detailed programme
information.
• Due to inaccurate information provided by the broadcaster,
some icons may appear or be absent in error.
001
002
003
004
************
************
******
************
005
006
****
******
Wed.30.Apr 12:46
Now
001 ************
Next
********************
************* 12:00
12:30
11:30
12:00
-
-
Now ************************
More
12:00 11:30 -
PDP-LX6090.book Page 39 Monday, February 25, 2008 10:08 AM