Pioneer PDP-LX5090 - Manual (Page 74)

Using the HDMI Control 13
74
En
Chapter 13
Using the HDMI Control
Using the HDMI Control functions
You can operate such Pioneer devices as a recorder, player, AV
system or HD AV Converter that support the HDMI Control
functions using the remote control of the flat screen TV.
The HDMI Control functions include playback of content using on-
screen control panel on the flat screen TV, recording of a TV
programme while watching, timer recording using a programme
list on the connected recorder, and confirmation of timer recording
registered in the recorder. For details, see the table below.
Note
• The KURO LINK function name used on the web and in
catalogues is referred to as HDMI Control in the operating
instructions and on the product.
• Maximum number of devices that can be connected and
controlled using the remote control unit of the flat screen TV is
as follows: recorder x 2, player x 2, AV system or HD AV
Converter x 1.
• Not all device operations may be available for HDMI Control
functions.
HDMI Control functions
Note
• When using the HDMI Control functions, operate the remote
control unit while pointing it toward the remote control sensor
(
t) located at the bottom right of the front panel of the flat
screen TV.
• You cannot use two or more HDMI terminals at the rear of the
flat screen TV at the same time except “Power Off” and “Display
Language Setup” functions.
Function Description
Usable
devices
Playback of
content The proper input source is
automatically selected and the
content is played back on the flat
screen TV as you press PLAY on the
connected device Recorder/
player
On-screen
control Recorder/player operation can be
controlled on-screen or with the
remote control unit of the flat
screen TV (play, stop, fast forward/
reverse, etc.) Recorder/
player
Recording of
TV
programme The programme now watching can
be recorded using the remote
control unit of the flat screen TV Recorder
Timer
recording Timer recording using a
programme list on the recorder
connected Recorder
Confirmation
of recording
schedule Recording schedule registered in the
recorder can be displayed and
confirmed on the screen using the
remote control unit of the flat screen TV Recorder
Display
Language
Setup Information on the display menu
language is transferred to the
recorder or player connected to the
flat screen TV. For details, see the
operation manual that came with
the recorder or player. Recorder/
player
AV system
control Receiver/amplifier operation can
also be controlled with the remote
control unit of the flat screen TV
(volume, surround mode and input
selection of the HDMI terminal) AV system
Power On The connected recorder can be
turned On when the flat screen TV
is turned On.
The flat screen TV can be turned
On when the connected
recorder(s) or player(s) is turned
On and images are input to the flat
screen TV.
Recorder
Recorder/
player
Power Off The connected device(s) can be
turned Off when the flat screen TV
is turned Off Recorder/
player/AV
system
HD AV
Converter
control An HD AV Converter can also be
connected and controlled (For
details, see page 77) HD AV
Converter
Function Description
Usable
devices
HOME
MENU RETURN
EXIT
EPG
P
ENTER
DVD
TOPMENU
/GUIDE
MENU
RETURN
ENTER
• Press i+/– or e to adjust
volume for the AV system.
• Press , , , , ENTER,
RETURN ( ) or colour ( RED,
GREEN, YELLOW, BLUE )
buttons to use such functions
as the disc navigator and
electronic programme guide
(EPG) on the connected
recorder or player.
PDP-LX6090.book Page 74 Monday, February 25, 2008 10:08 AM