Pioneer PDP-LX5090 - Manual (Page 54)

Useful adjustment settings 11
54
En
AV source PC source
Note
• While receiving High Definition video signals, pressing f
switches among “Auto”, “FULL”, “Dot by Dot”, “ZOOM”, “WIDE”
and “4:3”.
• Some HD broadcasts may display 4:3 content with side masks,
which may cause uneven wear. After viewing it is recommended
to view full-screen motion video (see
Detecting side masks).
Selecting a screen size automatically
The flat screen TV automatically selects an appropriate screen size
when the received video signals contain WSS (wide screen
signaling) information or when video signals are received from a
connected HDMI equipment (see page 62). To activate this
function, use the following procedure.
1 Press HOME MENU.
2 Select “Option“ ( / then ENTER).
3 Select “Auto Size“ ( / then ENTER).
4 Select “Natural” or “Wide-Zoom” ( / then ENTER).
5 Press HOME MENU to exit the menu.
Note
• Manually select an appropriate screen size if an image does not
automatically switch to a correct screen format.
• When the video signal contains no aspect ratio information, the
function will not work even with “Natural” or “Wide-Zoom”
selected.
Detecting side masks
Some HD broadcasts may display 4:3 content with side masks. The
flat screen TV automatically detects these side masks to provide
grey side masks when “Natural” has been selected for “Auto Size”,
or display the image full screen with the side masks removed when
“Wide-Zoom” has been selected. This function does not operate
when “Off” is selected for “Auto Size”.
1 Press HOME MENU.
2 Select “Option“ ( / then ENTER).
3 Select “Side Mask“ ( / then ENTER).
4 Select “Detection” ( /).
5 Select “On” ( /).
6 Press HOME MENU to exit the menu.
Important
• The “On” setting prevents uneven wear on 4:3 content and side
masks and can reduce the possibility of image retention.
Note
• You cannot set the Side Mask detection to “On” or “Off” when
“Off” is selected in “Auto Size”.
• The Side Mask detection does not operate on 4:3 content
displayed in SD signals.
• The Side Mask detection is canceled when you switch the
screen size. To restore the Side Mask detection, select another
input source or place the flat screen TV into standby, then turn
the power on again.
• “Auto” will appear on the channel display when this function is
on.
• Set the Side Mask detection function to “On”, the High
Definition 16:9 aspect ratio images containing side masks will
be detected and the side masks will be added automatically or
the image displayed in full screen, leading to more effective
countermeasures taken for the screen burning.
• Detection errors may occur depending on the HD contents. In
case a detection error occurs, manually change the screen size
to the desired size.
Item Description
Off Deactivates the Auto Size function
Natural Naturally adjusts the image to the screen
Wide-Zoom Enlarges and displays only the 4:3 aspect ratio
portion in full and wide screen
4:3
CINEMA FULL 14:9
ZOOM CINEMA 14:9
FULL Auto
WIDE
Dot by
Dot
4:3
FULL
Item Description
Off Deactivates the Side Mask detection
On Activates the Side Mask detection
PDP-LX6090.book Page 54 Monday, February 25, 2008 10:08 AM