About “option” menus, Switching the vertical drive mode (av source only), 1 press home menu – Pioneer PDP-LX5090 User Manual
Page 51: 2 select “option” (i/j then enter), 3 select “drive mode” (i/j then enter), 4 select “1”, “2” or “3” (i/j then enter), 5 press home menu to exit the menu, Note, Adjusting image positions (av source only), 2 select “option“ (i/j then enter)
Useful adjustment settings
11
51
En
E
n
glish
Chapter 11
Useful adjustment settings
About “Option” menus
The “Option” menu consists of two screens. To select the desired
menu, press repeatedly
/ to switch between Screen 1 and
Screen 2. The current screen number appears at the top right
corner on the screen.
Switching the vertical drive mode
(AV source only)
You can select the desired drive mode according to the programme
you watch.
1
Press HOME MENU.
2
Select “Option” (
/ then ENTER).
3
Select “Drive Mode” (
/ then ENTER).
4
Select “1”, “2” or “3” (
/ then ENTER).
5
Press HOME MENU to exit the menu.
Note
• This setting can be made for each input source separately.
• This setting cannot be made when 480i, 480p, 1080i@60 Hz,
720p@60 Hz, 1080p@24 Hz or 1080p@60 Hz signals are input.
• The Drive Mode does not operate when “On” is selected in
“Game Control Pref”.
Adjusting image positions
(AV source only)
This setting adjusts the horizontal and vertical positions of images
on the flat screen TV.
1
Press HOME MENU.
2
Select “Option“ (
/ then ENTER).
3
Select “Position“ (
/ then ENTER).
4
Select “H/V Position Adjust“ (
/ then ENTER).
5
Adjust the vertical position (
/) or the horizontal position
(
/).
6
Press HOME MENU to exit the menu.
Note
• To restore the factory defaults for all items, press
/ to select
“Reset” in step 4, and then press
ENTER. A confirmation screen
appears. Press
/ to select “Yes”, and then press ENTER.
• Adjustments are stored separately according to input source.
• Depending on the displayed video, the image position may not
change even after adjustment.
• When “Dot by Dot” is selected for the screen mode, the
“Position” menu is dimmed.
Option
Position
Auto Size
Side Mask
HDMI Input
HDMI Control Setting
Blue LED Dimmer
Orbiter
Video Pattern
1/2
Auto
On
Off
Option
Drive Mode
Colour System
Input Select
Game Control Pref
Room Light Sensor
2/2
On
Off
Auto
1
Screen Protection
(For AV source)
PDP-LX6090.book Page 51 Monday, February 25, 2008 10:08 AM