Adjusting bass adjusting treble, Combining and using pioneer a v equipment, Adjusting bass – Pioneer AVIC-60D-2 User Manual
Page 149: Adjusting treble
147
Chapter
6
Combining and Using Pioneer A
V
Equipment
1
Press
5 or ∞ to select “EQUALIZER MENU” from the AUDIO MENU, and press
A.MENU (AUDIO) button.
The EQUALIZER MENU is displayed.
BAND (band), LEVEL (adjustment level), FREQUENCY (Centre frequency), Q FAC-
TOR (quality factor)
2
Select the equalizer band you want to adjust with
2
2
2
2 / 3
3
3
3.
➲
If you make adjustments when a curve other than CUSTOM2 is selected, CUSTOM1 curve
is updated.
■Adjusting bass
You can adjust the cut-off frequency and the bass level.
➲
In FRONT1 mode, bass adjustment affects only the rear output: front output cannot be
adjusted.
1
Press
5 or ∞ to select “BASS” from the AUDIO MENU, and press A.MENU (AUDIO)
button.
2
Press
5 or ∞ to adjust the bass level.
Each press of
5 or ∞ increases or decreases the bass level. +6 - -6 is displayed as the
level is increased or decreased.
3
Select the desired frequency with
2
2
2
2 or 3
3
3
3.
40 - 63 - 100 - 160 (Hz)
■Adjusting treble
You can adjust the cut-off frequency and the Treble level.
➲
In FRONT1 and FRONT2 modes, treble adjustment affects only the front output: rear output
cannot be adjusted.
1
Press
5 or ∞ to select “TREBLE” from the AUDIO MENU, and press A.MENU
(AUDIO) button.
2
Press
5 or ∞ to adjust the treble level.
Each press of
5 or ∞ increases or decreases the treble level. +6 - -6 is displayed as the
level is increased or decreased.
3
Select the desired frequency with
2
2
2
2 or 3
3
3
3.
2.5k - 4k - 6.3k - 10k (Hz)
BAND (band) :
LOW (low) - MID (mid) - HIGH (high)
LEVEL (adjustment level) : +6 - -6 is displayed as the adjustment level is increased or
decreased.
FREQUENCY (Centre frequency)
LOW :
40 - 80 - 100 - 160 (Hz)
MID :
200 - 500 - 1 k - 2 k (Hz)
HIGH :
3.15 k - 8 k - 10 k - 12.5 k (Hz)
Q FACTOR (quality factor) : 2 N - 1 N - 1 W - 2 W