Pioneer AVIC-60D-2 - Manual (Page 40)

38
■Selecting the country where you want to search
Information on the disc is arranged according to each country. When searching for your desti-
nation, your Navigation System searches for it in the country currently selected. Therefore, if
your destination is in another country, you must change the country setting before starting the
destination search. (Once the country is selected, the Navigation System searches the destina-
tion from the data of this country until the setting is altered.)
Here, Address Search is given as an example:
1 From the Main menu, select “New Destination”, and then select “Address Search”.
2 Select “Country” and click the OK button.
3 Select the area you want to search, and click the OK button.
When you are returned to the previous display, proceed to the searching operation.
■Perform the route calculation of the several route options, and
select one
You can get route calculations of several route options. By confirming route options on the
screen, you can select your favourite route. After route options are calculated, select the one
you want.
1 Change the setting of “Route No.” in “Settings” menu.
For the details of the method of changing the setting, see “Modifying the Default Set-
tings” on page 89 and “Route No.” on page 90.
2 Search your destination and set the route.
Calculated routes are shown in different colours (from two to six routes).
3 Move the joystick to select the route.
The list of the routes being calculated is displayed on the left side of the screen. On the
bottom-left of the screen, the information on the route currently selected is shown.
1, 2, 3