Pioneer AVIC-60D-2 - Manual (Page 41)

39
Chapter
2
Setting a Route to
Y
our Destination
The following information is displayed on this screen:
1. Use/avoid motorway
2. Distance to your destination
3. Travel time to your destination
➲
You can set whether to use toll road or ferry. The set contents will be reflected to all the
route options. For details, see “Avoid Toll Road” and “Avoid Ferry” on page 90.
➲
Route options are indicated in the order of matching the set conditions in “Avoid Motor-
way”.
➲
Even if the use of motorway is set in “Avoid Motorway”, the route without using a motor-
way may be calculated (if your destination is close to your current location and the
route cannot include a motorway.).
4 Check the information displayed on the screen.
You can also check details of the roads along the selected route. If you move the joystick
to the left, the screen for selecting the confirmation method appears. (If you press BACK
button, you can return to the previous display.) For details of the operation after this step,
see “Checking the Set Route” on page 48.
5 Click the OK button.
The route you selected is accepted, and the map of your surroundings appears. When you
start driving, the route guidance begins.
➲
If the above operations are not done within 30 seconds after the route calculation is
completed and you have started your vehicle, the route selected at the time is automat-
ically chosen.
➲
It may take some time until detailed information of the route can be checked after a
route calculation.
About the route condition
When the calculation of only one route is set, you can search a route option by com-
bining the following conditions (for the details of how to set the calculation condi-
tions, see “Fastest/Shortest” on page 90 and “Avoid Motorway” on page 90).
For example, when “Shortest” and “Avoid Motorway” (“On”) are combined, the
route, which avoids motorway, and has the shortest travel time, will be calculated
and displayed on the screen.
When two conditions is mixed as “Shortest” & “Avoid Motorway”, the shortest
route to your destination while avoiding a motorway is shown.
Condition 1 :whether to put priority on the distance, or time
Shortest : Calculate a route with the shortest distance to your destination
as a priority.
Fastest : Calculate a route with the shortest travel time to your destina-
tion as a priority.
Condition 2 :whether to use motorway or not
Avoid Motorway : Calculate a route that avoids motorway. (A route using the
motorway may be set if your destination is far away.)