Pioneer DDJ-SP1 - Manual (Page 5)

En 5
English
Browser section
3 4
PANEL SELECT
• BACK
— UTILITY
LOAD
PREPARE
VIEW
LOAD LOAD
AREA
SHIFT
2
3 5
4 4
1 1
1 DECK button
Press:
Selects the deck to be used.
The [DECK] button lights when deck 3 or deck 4 is selected. It does
not light when deck 1 or deck 2 is selected.
[SHIFT] + press:
Selects and opens the [REC] panel, [DJ-FX] panel or [SP-6] panel.
2 Rotary selector
Turn:
The cursor in the library or on the [CRATES] panel moves up and down.
Press:
The cursor moves between the [CRATES] panel and library each time
the rotary selector is pressed.
3 LOAD PREPARE (AREA) button
Press:
Loads tracks to the [Prepare] panel.
[SHIFT] + press:
Selects and opens the [Files] panel, [Browse] panel, [Prepare] panel
or [History] panel.
4 LOAD button
Loads the selected track onto the currently selected deck.
5 BACK button
Press:
The cursor moves between the [CRATES] panel and library each time
the button is pressed.
Press for over 1 second:
Switches to the utilities mode. For details on the utilities mode, see
Changing this unit’s settings (p.7).
[SHIFT] + press:
Switches the Serato DJ layout.
Main unit side panel
DIMMER MODE
1 2 3
1 USB port
Connect to a computer.
! USB hubs cannot be used.
2 Kensington security slot
3 DIMMER switch
ON: Sets the LED’s brightness to dim.
OFF: Sets the LED’s brightness to bright.
! Power consumption can be decreased by setting the LED’s
brightness to dim.
Disconnect the USB cable connected to this unit before switching
the [DIMMER] switch from the [ON] position to the [OFF] position.
The indicators will not get brighter if the switch is set to the [OFF]
position while the USB cable is connected.
System setup example
When using in combination with a DJ mixer
SYNC
DJ mixer
DJM-900SRT, etc.
Audio cable
USB cable
DJ player
Analog player
Audio cable Audio cable
Audio cable
DJ player
Analog player
Computer
DDJ-SP1
USB cable
When using in combination with a DJ controller
SYNC
0 0
2X 1/ 2X
1 2 10
9
8
7
6
5
4
3
2
1
0 10
9
8
7
6
5
4
3
2
1
0
Computer
DDJ-SP1
DJ Controller
DDJ-S1, etc.
USB cable
USB cable
Operation
Starting the system
The computer and Serato DJ-certifiable DJ controller or DJ mixer must
be connected beforehand.
! For instructions on operating the Serato DJ software and the Serato
DJ-certifiable DJ mixer or DJ controller, see their respective operat-
ing instructions.
1 Connect the Serato DJ-certifiable DJ mixer or DJ
controller to the computer by USB cable.
2 Turn on the computer’s power.
3 Turn on the power of the Serato DJ-certifiable DJ
mixer or DJ controller.
4 Launch Serato DJ.
! When using Windows 7
From the Windows [Start] menu, click the [Serato DJ] icon under
[All Programs] > [Serato] > [Serato DJ].
! For Mac OS X
In Finder, open the [Applications] folder, then click the [Serato DJ]
icon.