Pioneer AVIC-70D - Manual (Page 39)

37
Chapter
2
Basic Operation
■Changing the scale of the map
On the top-right of the map display, the scale of the map is shown. If you move the scale con-
troller up or down, you can change the scale of the map through 16 levels:
25m, 50m, 100m, 200m, 500m, 1km, 2km, 5km, 10km, 20km, 50km, 100km, 200km,
500km, 1000km, 2000km (25yd, 50yd, 100yd, 1/4mi, 1/2mi, 3/4mi, 1mi, 2 1/2mi, 5mi,
10mi, 25mi, 50mi, 100mi, 250mi, 500mi, 1000mi). If you keep holding up or down the scale
controller, you can zoom in or out in smaller increments.
■Moving the map to the location you want to see
You can move the joystick of the Remote Controller up and down, left and right, or diago-
nally. If you move the joystick towards the location you want to see, the map moves accord-
ingly. If you press down the joystick while moving the map, you can move the map more
quickly. At this time, the cross pointer appears at the centre of the screen. Also a line connect-
ing between the current location and cross pointer appears.
(1) Scroll location
The position of cross pointer shows the location selected on the current map.
(2) Distance from the current location
The distance between the location pointed by cross pointer and the current location is shown.
When you want to see smaller streets with a more
detailed map
When you want to know a rough position, or seeing wider
range
(1)
(2)