Pioneer AVIC-70D - Manual (Page 73)

71
Chapter
5
Utilising V
arious
Inf
ormation
Registering a Password
If you register a password, only those who know the password can use your Navigation System.
1 Select “Settings” in the Main menu, then select “Others” and “Password”. Click the
OK button.
2 Enter a password.
Carefully enter each character. A password must be between 6 and 24 characters (alpha-
betic or numeric).
3 Select “OK” and click the OK button.
A message confirming the password appears, and a voice message confirming the pro-
nunciation is played.
4 If the pronunciation is correct, select “Yes” and click the OK button.
The entered password is set, and the Others menu appears.
When your Navigation System is activated, a display for entering your password appears.
(
see “Switching On and Off” on page 25 .)
➲
If you want to change your password, at first enter the password that is currently set. (You
cannot enter using the numeric keypad.) When the display for entering your password
appears again, enter the new password.
➲
Once the password is registered, you can use the voice operation for the Navigation Sys-
tem to recognise the password.
➲
If you change the language used, the set password is cleared. If desired, set the password
again.
➲
In order not to forget your registered password, write it down on the sheet at the back of
this manual, and remove it and store in a safe place. If you forget your password, consult
the shop or your dealer.