Map display menu, Hardware menu, Others menu – Pioneer AVIC-70D User Manual
Page 90: Map display menu hardware menu others menu
88
■Map Display menu
Map Orientation
This setting controls whether the map is shown with the driving direction upward, or with
North at the top.
Map Display
To improve the visibility of the map during the evening, you can change the combination of
the colours of the map.
Tracking Display
Timing for deleting tracking can be set.
■Hardware menu
Hardware Volume
The volume of voice guidance played by your Navigation System can be set. To change the
volume, select “+” or “-” with the joystick and click the OK button.
Monitor Type
The scanning type can be set according to the type of a display used. If the screen of the dis-
play you are using is blurred, change this setting to the one that gives the clearer display.
■Others menu
Demo Mode
This is a demonstration function for shops. After a route is set, the simulation of the route
guidance to a destination is automatically displayed. Normally, set this to “Off”.
Mute on Voice Recognition
This can be set when your Navigation System is combined with the Pioneer Head Unit with a
muting function (one that has an Yellow/black lead). This setting controls whether the volume
of the Head Unit is automatically muted during voice operation.
Heading Up* : To ensure that the driving direction always faces up, the map automati-
cally rotates according to the direction of your vehicle.
North Up :
The map is always displayed with North at the top.
Illumination* : You can change the combination of the colours of a map according to
whether the vehicle lights are On or Off.
Day Display :
The map is always displayed with bright colours.
On (always) :
Display tracking for all journeys.
On (this journey) : Display tracking dots but erase them when the navigation system is
turned off (when cutting the engine of your vehicle).
Off* :
Do not display tracking dots.
Type A* : Non-interlaced type. (When using Pioneer’s display, choose this setting.)
Type B :
Interlaced type.
On (Repeat) : Demo Mode is set on.
Off* :
Demo Mode is set off.
On* : During voice operation, the volume of the Head Unit is muted automatically.
Off :
The volume of Head Unit stays the same during voice operation.