Pioneer AVIC-70D - Manual (Page 83)

81
Chapter
5
Utilising V
arious
Inf
ormation
Checking the Navigation Status
The navigation status, including the driving status of a vehicle, positioning status by satellite,
learning status of the sensor, and cable connection status can be checked.
■Checking positioning information by satellite
Your Navigation System uses positioning data transmitted from GPS satellites. GPS recep-
tion status can be checked on the screen.
1 Select “ Information” in the Main menu, then select “Location Status” and “GPS Sta-
tus”. Click the OK button.
The GPS Status screen appears.
1. Position of a satellite and radio wave reception status
The position of a GPS satellite from which currently received data is shown. The satel-
lite used for positioning is shown in orange, any other satellites from which data is cur-
rently being received are shown in yellow, and satellites from which data cannot be
received are shown in black.
2. Longitude and latitude
If current positioning is not available, the longitude and latitude measured last is
shown.
3. Current date, time, and a day of a week
4. Positioning status by GPS satellite (2-dimension, 3-dimension, etc.)
Current positioning status is shown. The status depends on data reception status from a
GPS satellite.
2 Push the BACK button.
The previous screen appears.
1
2
3
4