Connecting and disconnecting an, Ipod, Plugging and unplugging a usb – Pioneer AVIC-F860BT User Manual

Page 16: Storage device, Startup and termination, 02 basic operation, Connecting and disconnecting an ipod, Plugging and unplugging a usb storage device

Advertising
background image

Inserting an SD memory card

F960DAB

F960BT

F860BT

% Insert an SD memory card into the SD
card slot.
Insert the SD memory card with the terminal
contacts face-down, and press the card until it
clicks and locks completely.

Ejecting an SD memory card

F960DAB

F960BT

F860BT

1

Press the middle of the SD memory

card gently until it clicks.

2

Pull the SD memory card out straight.

Connecting and disconnecting
an iPod

Connecting your iPod

= For details of the connections, refer to the

Installation Manual.

Disconnecting your iPod

% Pull out the cables after confirming
that no data is being accessed.

Plugging and unplugging a USB
storage device

p This product may not achieve optimum per-

formance with some USB storage devices.

p Connection via a USB hub is not possible.

p A USB cable is required for connection.

Plugging in a USB storage device

1

Pull out the plug from the USB port of

the USB cable.

2

Plug a USB storage device into the USB

cable.

2

1

1 USB cable
2 USB storage device

Unplugging a USB storage device

% Pull out the USB storage device after
checking that no data is being accessed.

Startup and termination

1

Start the engine to boot up the system.

After a short pause, the splash screen comes
on for a few seconds.

2

Turn off the vehicle engine to termi-

nate the system.
This product is also turned off.

Engb

16

Chapter

02

Basic operation

Advertising
This manual is related to the following products: