Pioneer AVIC-F860BT - Manual (Page 48)

Restoring the default settings
You can restore settings or recorded content
to the default settings.
1 Press the MAP button.
The Map screen appears.
2 Touch the following key.
Displays the navigation menu on
the Map screen.
# This screen has several options. Touch to
see the full list.
3 Touch [Settings].
The
“Settings” screen appears.
4 Touch the following key.
Displays the list of additional fea-
tures on the certain screen.
5 Touch [Clear User Data].
A confirmation message appears.
6 Touch [Clear User Data].
The recorded contents are cleared.
Information on each option
of
“Settings”
“Route Preferences” settings
Vehicle
You can set the type of vehicle you will use to
navigate the route. When you first touch this
key, you see the list of default vehicle profiles.
When creating a new vehicle profile, select
one of the vehicle types.
! Car:
— Manoeuvre restrictions and directional
constraints are taken into account when
planning a route.
— Roads are used only if access for cars is
allowed.
— Private roads and resident-only roads
are used only if they are inevitable to
reach the destination.
— Walkways are excluded from routes.
! Emergency:
— All manoeuvres available at intersec-
tions are taken into account.
— Directional constraints are taken into
account in the same way as travel in the
opposite direction is allowed at low
speeds.
— Only private roads that need to be used
to access the destination are included.
— Walkways are excluded from routes.
! Bus:
— Manoeuvre restrictions and directional
constraints are taken into account when
planning a route.
— Roads are used only if access for buses
is allowed.
— Private roads, resident-only roads and
walkways are excluded from routes.
! Taxi:
— Manoeuvre restrictions and directional
constraints are taken into account when
planning a route.
— Roads are used only if access for taxis is
allowed.
— Private roads, resident-only roads and
walkways are excluded from routes.
! Lorry:
— Manoeuvre restrictions and directional
constraints are taken into account when
planning a route.
— Only roads that allow truck access are
included.
— Private roads, resident-only roads and
walkways are excluded from routes.
— U-turns are not used in routes (turning
around on a divided road is not consid-
ered a U-turn for the purpose of this sys-
tem).
— Route planning can also be configured
to incorporate dimension, weight, and
freight hazard restrictions for maps that
contain such data.
Engb
48
Chapter
10 Customising preferences of the navigation