Pioneer AVIC-F860BT - Manual (Page 17)

On first-time startup
When you use this product for the first time,
select the language that you want to use.
1 Start the engine to boot up the system.
After a short pause, the splash screen comes
on for a few seconds.
The
“Select Program Language” screen ap-
pears.
2 Touch the language that you want to
use on screen.
3 Touch the following key.
Displays the “Smartphone Setup”
screen.
4 Touch the item you want to set.
= For details, refer to Information on the con-
nections and functions for each device on
page 71.
5 Touch the following key.
F60DAB
F960DAB
Displays the “DAB ANTENA
POWER SETTING ” screen.
Proceeds to the next step.
F960BT
F860BT
Displays the Top menu screen.
6 Touch the setting item according the
DAB aerial to be used.
! Yes (default):
Supplies power to a Digital Radio aerial. Se-
lect when using the optional Digital Radio
aerial (AN-DAB1) (sold separately) with this
product.
! No:
Does not supply power. Select when using
a passive aerial with no booster.
7 Touch [OK].
The Top menu screen appears.
# If you touch , the display returns to the pre-
vious screen.
Regular startup
% Start the engine to boot up the system.
After a short pause, the splash screen comes
on for a few seconds.
p The screen shown will differ depending on
the previous conditions.
p If the anti-theft function is activated, you
must enter your password.
p The terms appear if the screen displayed
last was the navigation screen.
Read the terms carefully, checking the de-
tails, and then touch [
OK] if you agree to
the conditions.
After you touch [
OK], the screen that was
displayed just before turning off the ignition
switch (ACC OFF) is displayed.
A message about the map
database
After you start using this product, a message
related to map data may be displayed.
p This message is displayed the first time you
turn on this product each month.
Turning off the display
You can turn off the display at night or when
the screen is too bright.
% Press and hold the MODE button.
The display turns off.
p If you touch the screen when the display is
off, it reverts to the original screen.
Engb
17
Chapter
02
Basic
operation
Basic operation