Error messages, Appendix – Pioneer AVIC-F860BT User Manual

Page 185

Advertising
background image

Symptom

Cause

Action

The smartphone was not
charged.

Charging stopped because the tem-
perature of the smartphone rose
due to prolonged use of the smart-
phone during charging.

Disconnect the smartphone from the cable,
and wait until the smartphone cools down.

More battery power was consumed
than was gained from charging.

This problem may be resolved by stopping
any unnecessary services on the smartphone.

Error messages

When problems occur with this product, an error message appears on the display. Refer to the
table below to identify the problem, then take the suggested corrective action. If the error persists,
record the error message and contact your dealer or your nearest Pioneer service centre.

Common

Message

Cause

Action

AMP Error

This product fails to operate or the
speaker connection is incorrect; the
protective circuit is activated.

Check the speaker connection. If the mes-
sage fails to disappear even after the engine
is switched off/on, contact your dealer or an
authorised Pioneer Service Station for assis-
tance.

Product overheat. System will
be shut down automatically
in 1 minute. Restart the pro-
duct by ACC-Off/On may fix
this problem. If this message
keeps showing up, it is possi-
ble that some problem oc-
cured in the product.

The temperature is too high for this
product to operate.

Follow the instructions displayed on the
screen. If this does not solve the problem,
contact your dealer or an authorised Pioneer
Station for assistance.

DAB tuner

Message

Cause

Action

Antenna Error

The aerial connection is incorrect.

Check the aerial connection. If the message
fails to disappear even after the engine is
switched off/on, contact your dealer or the
nearest authorised Pioneer service centre for
assistance.

Aha Radio

Message

Cause

Action

Communication error oc-
curred.

iPod failure.

Disconnect the cable from the iPod. Once the
iPod

’s main menu is displayed, reconnect the

iPod and reset it.

Error-02-6X

iPod failure.

Disconnect the cable from the iPod. Once the
iPod

’s main menu is displayed, reconnect the

iPod and reset it.

Engb

185

Appendix

Appendix

Appendix

Advertising
This manual is related to the following products: