03 connections, Speaker connection, Connections – Pioneer X-CM42BTD-W User Manual

Page 11: Connections 03, English français español, Chapter 3

Advertising
background image

Connections

03

11

En

English

Français

Español

Chapter 3:

Connections

CAUTION

• Be sure to turn off the power and unplug the power cord

from the power outlet whenever making or changing

connections.

• Connect the power cord after all the connections

between devices have been completed.

Speaker connection

• Push open the tabs and insert exposed wire.
• The provided speaker wire with red tube is for the (+)

terminal. Connect the wire with red tube the (+)

terminal, and other wire to the (–) terminal.

• Both speakers can be used on either the right or the left

side.

CAUTION

• These speaker terminals carry HAZARDOUS LIVE

voltage

. To prevent the risk of electric shock when

connecting or disconnecting the speaker cables,

disconnect the power cord before touching any

uninsulated parts.

• Do not connect any speakers other than those supplied

to this system.

• Do not connect the supplied speakers to any amplifier

other than the one supplied with this system.

Connection to any other amplifier may result in

malfunction or fire.

• Do not attach these speakers to the wall or ceiling.

They may fall off and cause injury.

• Do not install your speakers overhead on the ceiling or

wall. The grill is designed to be detachable, and as

such it may fall and cause damage or personal injury if

installed overhead.

• These speakers are magnetically shielded. However,

depending on the installation location, color distortion

may occur if the speaker system is installed extremely

close to the screen of a television set. If this happens,

turn off the television set, and then turn it on after 15 to

30 minutes. If the problem persists, move the speaker

system away from the television set.

• Make sure that the speaker cable cores do not become

exposed and make contact with other cable cores. This

may cause malfunction of the product.

• Do not allow the speaker cable core to come into contact

with the receiver body.

• If the speaker cable core comes into contact with any

metal portion of the receiver’s body, it may damage the

speakers and cause smoke and fire.

Insert speaker cables securely into the terminals and

check that the cable does not come out of easily.

Note

• There is no difference between L and R speakers.

AC IN

LINE

IN

SPEAKERS

L

R

ANTENNA

DAB/FM

R

L

1

2

Left

speaker

Right

speaker

This unit’s rear panel

Red tube

Supplied

speaker wire

X-CM32_VXE8_En.book 11 ページ 2014年3月12日 水曜日 午後2時52分

Advertising
This manual is related to the following products: