Pioneer X-CM42BTD-W - Manual (Page 12)

Connections 03
12
En
Connecting antennas
• Connect the DAB/FM wire antenna as shown below.
• To improve reception and sound quality, connect
external antennas (see Using external antennas).
1 Connect the DAB/FM wire antenna into the
DAB/FM antenna socket.
For best results, extend the DAB/FM antenna fully and fix to a
wall or door frame. Don’t drape loosely or leave coiled up.
Using external antennas
To improve DAB/FM reception
Use a PAL connector (not supplied) to connect an external
DAB/FM antenna.
Plugging in
Before making or changing the connections, switch off the
power and disconnect the power cord from the AC outlet.
After you’ve finished making all connections, plug the unit
into an AC outlet.
CAUTION
• Do not use any power cord other than the one supplied
with this unit.
• Do not use the supplied power cord for any purpose
other than that described above.
ANTENNA
DAB/FM
ANTENNA
DAB/FM
One-touch PAL
connector
75 coaxial
cable
AC IN LINE
IN
SPEAKERS
L R R L
To AC outlet
This unit’s rear panel
Power cord
X-CM32_VXE8_En.book 12 ページ ２０１４年３月１２日 水曜日 午後２時５２分