Sound controls, Equalizer, P.bass control – Pioneer X-CM42BTD-W User Manual

Page 14: Bass/treble control, Setting the wake-up timer, Getting started 04

Advertising
background image

Getting started

04

14

En

Sound controls

Equalizer

When the EQUALIZER is pressed, the current mode setting

will be displayed. To change to a different mode, press the
EQUALIZER

repeatedly until the desired sound mode

appears.

P.bass control

When the power is first turned on, the unit will enter the

P.bass mode which emphasises the bass frequencies. To

cancel the P.bass mode, press the P.BASS on the remote

control.

Bass/treble control

Press the BASS/TREBLE, then press

/ to adjust the bass

or treble.

Note

• The EQUALIZER and P.BASS cannot operate

simultaneously. The most recently selected of these two

functions will be the one used.

BASS/TREBLE can operate alongside either the

EQUALIZER

or P.BASS.

When one of the above two functions is
selected, the function that is not selected will
be displayed as follows.

1

When P.BASS setting (ON/OFF) is changed

EQUALIZER : FLAT

2

When EQUALIZER setting is changed

P.BASS : OFF

Setting the wake-up timer

Used to change the existing timer setting, or to set a new

timer.

1

Press

STANDBY/ON to turn the power on.

2

Press and hold CLOCK/TIMER.

3

Press

/ to select “ONCE” or “DAILY”,

then press ENTER.

ONCE

– Once timer play works for one time only at a

preset time.
DAILY

– Daily timer play works at the same preset time

and days of week.

4

Press

/ to select “TIMER SET”, then

press ENTER.

5

Press

/ to select the timer playback

source, then press ENTER.

CD

, DAB, FM, USB/IPOD, IPOD (X-CM42BTD only), BT

AUDIO

, AUDIO IN and LINE can be selected as the playback

source.

6

Press

/ to select the timer day, then

press ENTER.

7

Press

/ to set the hour, then press

ENTER.

8

Press

/ to set the minute, then press

ENTER.

Set the time to finish as in steps 7 and 8 above.

9

Adjust the volume press VOLUME +/– , then

press ENTER.

10 Press

STANDBY/ON to enter the power

standby mode.

The TIMER indicator lights up.

NIGHT

FLAT

A flat and basic sound

ACTIVE

DIALOGUE

A sound that can be enjoyed
at night even with lower volume

A powerful sound that
emphasizes low and high tones

A sound that allows the radio or
vocals to be heard more easily

04_Getting_started_X-CM32.fm 14 ページ 2014年4月8日 火曜日 午後8時28分

Advertising
This manual is related to the following products: