09 other connections, Connecting auxiliary components, Other connections – Pioneer X-CM42BTD-W User Manual
Page 30: Other connections 09, Chapter 9
Other connections
09
30
En
Chapter 9:
Other connections
CAUTION
• Before making or changing the connections, switch off
the power and disconnect the power cord from the AC
outlet.
Connecting auxiliary components
Connect the front panel
AUDIO IN
mini-plug jack to your
auxiliary playback component.
• This method can be used to play music on this unit from
iPods/iPhones/iPads that do not support use of the iPod/
iPhone connector and USB terminal.
1
Press AUDIO IN as the input source.
When AUDIO IN is selected, “AUDIO IN” is displayed on the
main display.
Note
• If the
AUDIO IN
mini-plug jack is connected to
auxiliary phones jack, the volume of the unit will be
adjusted by the volume on the playback component. If
the sound is distorted after you lower the volume of the
unit, try lowering the volume on the auxiliary playback
component.
Connect the rear panel LINE IN audio jacks to your auxiliary
playback component.
1
Press AUDIO IN twice as the input source.
When LINE is selected, “LINE” is displayed on the main
display.
TIMER
VOLUME
PHONES
AUDIO IN
PHONES
AUDIO IN
Portable audio player, etc.
Stereo mini-plug
cable (commercially
available)
M
OOP
LINE
IN
SPEAKER
L
R
M
NBAL 75 Ω
R
TV
This unit’s rear panel
Audio cable
(commercially available)
X-CM32_VXE8_En.book 30 ページ ２０１４年３月１２日 水曜日 午後２時５２分