Pioneer DEH-P5100UB - Manual (Page 15)

1 Use MULTI-CONTROL to select
PTY search in the function menu.
Refer to Introduction to advanced operations
on page 12.
2 Push MULTI-CONTROL left or right to
select a program type.
News&Inf
—Popular—Classics—Others
3 Press MULTI-CONTROL to begin the
search.
The unit searches for a station broadcasting
that program type. When a station is found, its
program service name is displayed.
PTY (program type ID code) information is
listed in the following section. Refer to the
next page.
# To cancel the search, press MULTI-CONTROL
again.
# The program of some stations may differ from
that indicated by the transmitted PTY.
# If no station is broadcasting the type of pro-
gram you searched for,
Not found is displayed
for about two seconds and then the tuner returns
to the original station.
Using news program interruption
When a news program is broadcast from a
PTY code news station, the unit automatically
switches to the news broadcast station. When
the news program ends, reception of the pre-
vious program resumes.
% Press TA/NEWS and hold to turn on
news program interruption.
Press
TA/NEWS until NEWS ON appears in
the display.
# To turn off news program interruption, press
TA/NEWS and hold until OFF appears in the dis-
play.
# A news program can be canceled by pressing
TA/NEWS.
Note
You can also turn on or off news programs in the
menu that appears by using
MULTI-CONTROL.
Using radio text
This tuner can display radio text data trans-
mitted by RDS stations, such as station infor-
mation, the name of the currently broadcast
song and the name of the artist.
! The tuner automatically memorizes the
three latest radio text broadcasts received,
replacing text from the least recent recep-
tion with new text when it is received.
Displaying radio text
You can display the currently received radio
text and the three most recent radio texts.
1 Press DISP/SCRL and hold to display
radio text.
Radio text for the currently broadcasting sta-
tion is displayed.
# You can cancel radio text display by pressing
DISP/SCRL or BAND/ESC.
# When no radio text is received, No text ap-
pears in the display.
2 Push MULTI-CONTROL left or right to
recall the three most recent radio texts.
Pushing
MULTI-CONTROL left or right
switches between the current and the three
radio text data displays.
# If there is no radio text data in memory the dis-
play will not change.
3 Push MULTI-CONTROL up or down to
scroll.
Push
MULTI-CONTROL up to go to the begin-
ning. Push MULTI-CONTROL down to scroll
the radio text data.
Storing and recalling radio text
You can store data from up to six radio text
transmissions for keys
RT Memo 1 to
RT Memo 6.
1 Display the radio text you want to
store in memory.
Refer to Displaying radio text on this page.
Operating this unit
En
15
Section
02
Operating
this
unit