Pioneer DEH-P5100UB - Manual (Page 23)

Scan mode
Refer to Scanning folders and
tracks on page 19.
Pause
Refer to Pausing playback on page
20.
Sound Retriever
Refer to Using advanced sound re-
triever on page 20.
Notes
! To return to the ordinary display, press
BAND/ESC.
! If you select another folder during repeat play,
the repeat play range changes to All repeat.
! If you perform track search or fast forward/re-
verse during Track repeat, the repeat play
range changes to Folder repeat.
! When Folder repeat is selected, it is not pos-
sible to play back a subfolder of that folder.
! After file or folder scanning is finished, nor-
mal playback of the files begins again.
! If you do not operate functions within about
30 seconds, the display automatically returns
to the ordinary display.
Playing songs on iPod
You can control and listen to songs on an
iPod.
! For details about the supported iPod, refer
to iPod compatibility on page 63.
! When using an iPod, iPod Dock Connector
to USB Cable is required.
Basic Operations
1 Song number indicator
2 iPod name
3 Play time indicator
4 Song time (progress bar)
% Connecting an iPod
1 Plug an iPod into the USB port using the
iPod Dock Connector to USB Cable.
Regarding the position of USB port, refer to
Head unit on page 9.
2 Press SRC/OFF to select iPod as a source.
Playback will start.
% Fast forward or reverse
Push and hold
MULTI-CONTROL left or right.
% Select a track (chapter)
Push
MULTI-CONTROL left or right.
% Disconnecting an iPod
Pull out the iPod Dock Connector to USB
Cable.
Notes
! Read the precautions for iPod in the following
section. Refer to page 63.
! If an error message is displayed, refer to Error
messages on page 59.
Operating this unit
En
23
Section
02
Operating
this
unit