Pioneer DEH-P5100UB - Manual (Page 33)

Adjusting initial settings
Using the initial settings, you can customize
various system settings to achieve optimal per-
formance from this unit.
1 Function display
! Shows the function status.
1 Press SRC and hold until the unit turns
off.
2 Press MULTI-CONTROL and hold until
the initial setting menu appears in the dis-
play.
3 Turn MULTI-CONTROL to select one of
the initial settings.
Turn
MULTI-CONTROL to switch between the
functions in the following order.
Language select (language selection)
—
Calendar (calendar)
—Clock (clock)—
Off clock (off clock)
—FM step (FM tuning
step)
—Auto PI (auto PI seek)—Warning tone
(warning tone)
—AUX1 (auxiliary input 1)—
AUX2 (auxiliary input 2)
—Dimmer (dimmer)
—Brightness (brightness)—S/W control (rear
output and subwoofer controller)
—Mute
(sound muting/attenuation)
—Demonstration
(feature demo)
—Reverse mode (reverse
mode)
—Ever-scroll (ever scroll)—BT AUDIO
(Bluetooth audio)
—Pin code input (pin code
input)
—BT Version info. (Bluetooth version
information)
Use the following instructions to operate each
particular setting.
# BT AUDIO, Pin code input and
BT Version info. can be selected only when Blue-
tooth adapter (e.g., CD-BTB200) is connected to
this unit.
# To cancel initial settings, press BAND/ESC.
Selecting the display language
For your convenience, this unit equips multi-
ple language display. You can select the lan-
guage best suited to your first language.
1 Use MULTI-CONTROL to select
Language select in the initial setting menu.
Refer to Adjusting initial settings on this page.
2 Press MULTI-CONTROL to select the lan-
guage.
Each press of
MULTI-CONTROL selects lan-
guages in the following order:
English
—Français—Italiano—Español—
Deutsch
—Nederlands—РУССКИЙ
Setting the date
The calendar display adjusted in this mode ap-
pears when the telephone source is selected
or sources and the feature demo are off.
1 Use MULTI-CONTROL to select Calendar
in the initial setting menu.
Refer to Adjusting initial settings on this page.
Calendar appears in the display.
2 Push MULTI-CONTROL left or right to
select the segment of the calendar display
you wish to set.
Pushing
MULTI-CONTROL left or right will se-
lect one segment of the calendar display:
Day
—Month—Year
As you select segments of the calendar dis-
play the segment selected will blink.
3 Push MULTI-CONTROL up or down to
set the date.
Pushing
MULTI-CONTROL up will increase
the selected day, month or year. Pushing
MULTI-CONTROL down will decrease the se-
lected day, month or year.
Setting the clock
Use these instructions to set the clock.
Initial Settings
En
33
Section
04
Initial
Settings