Pioneer DEH-P5100UB - Manual (Page 47)

Registering a connected
cellular phone
1 Use MULTI-CONTROL to select
Set phone in the function menu.
Refer to Function and operation on page 45.
2 Push MULTI-CONTROL up or down to
select a pairing assignment.
P1 (user phone 1)
—P2 (user phone 2)—P3
(user phone 3)
—G1 (guest phone 1)—G2
(guest phone 2)
# As you select each assignment, you can see
whether or not a phone is already registered. If
the assignment is empty,
No data is displayed. If
the assignment is already taken, the device name
appears. To replace an assignment with a new
phone, first delete the current assignment. For
more detailed instructions, see Deleting a regis-
tered phone on this page.
3 Press MULTI-CONTROL to register the
currently connected phone.
When registration is completed,
Reg.Completed is displayed.
# If the registration fails, Reg.ERROR is dis-
played. In this case, return to step 1 and try
again.
Deleting a registered phone
1 Use MULTI-CONTROL to select
Delete phone in the function menu.
Refer to Function and operation on page 45.
2 Push MULTI-CONTROL up or down to
select a pairing assignment.
P1 (user phone 1)
—P2 (user phone 2)—P3
(user phone 3)
—G1 (guest phone 1)—G2
(guest phone 2)
# If the assignment is empty, No data is dis-
played and operation is not possible.
3 Push MULTI-CONTROL right to select
Delete YES.
Delete YES is displayed. Deleting phone is
now on standby.
4 Press MULTI-CONTROL to delete the
phone.
After the phone is deleted,
Deleted is dis-
played.
Connecting to a registered
cellular phone
Connecting to a registered phone
manually
1 Use MULTI-CONTROL to select
Connect phone in the function menu.
Refer to Function and operation on page 45.
2 Push MULTI-CONTROL up or down to
select a pairing assignment.
P1 (user phone 1)
—P2 (user phone 2)—P3
(user phone 3)
—G1 (guest phone 1)—G2
(guest phone 2)
# If the assignment is empty, No data is dis-
played and operation is not possible.
3 Press MULTI-CONTROL to connect the
selected cellular phone.
While connecting,
Connecting is displayed.
After the connection is completed, Connected
is displayed.
Connecting to a registered phone
automatically
1 Use MULTI-CONTROL to select
Auto connect in the function menu.
Refer to Function and operation on page 45.
2 Press MULTI-CONTROL to turn auto-
matic connection on.
If your cellular phone is ready for Bluetooth
wireless connection, connection to this unit is
automatically established.
# To turn automatic connection off, press
MULTI-CONTROL again.
Available accessories
En
47
Section
06
A
vailable
accessories