Pioneer DEH-P5100UB - Manual (Page 28)

Introduction of audio
adjustments
1 Audio display
Shows the audio adjustment status.
1 Press MULTI-CONTROL to display the
main menu.
2 Use MULTI-CONTROL to select AUDIO.
Turn to change the menu option. Press to se-
lect.
The audio menu is displayed.
3 Turn MULTI-CONTROL to select the
audio function.
Turn
MULTI-CONTROL to switch between the
audio functions in the following order.
Fader (balance adjustment)
—Powerful (gra-
phic equalizer adjustment)
—50Hz (7-band
graphic equalizer adjustment)
—Loudness
(loudness)
—SubWoofer1 (subwoofer on/off
setting)
—SubWoofer2 (subwoofer setting)—
Bass (bass boost)
—HPF (high pass filter)—
SLA (source level adjustment)
—ASL (auto-
matic sound levelizer)
# You can select the SubWoofer2 only when
subwoofer output is turned on in
SubWoofer1.
# When selecting FM as the source, you cannot
switch to
SLA.
# To return to the display of each source, press
BAND/ESC.
# If you do not operate functions except for
50Hz within about 30 seconds, the display is
automatically returned to the ordinary display.
Using balance adjustment
You can change the fader/balance setting so
that it can provide the ideal listening environ-
ment in all occupied seats.
1 Use MULTI-CONTROL to select Fader in
the audio function menu.
Refer to Introduction of audio adjustments on
this page.
# If the balance setting has been previously ad-
justed,
Balance will be displayed.
2 Push MULTI-CONTROL up or down to
adjust front/rear speaker balance.
Each time
MULTI-CONTROL is pushed up or
down, the front/rear speaker balance moves
towards the front or rear.
Front 15 to Rear 15 is displayed as the front/
rear speaker balance moves from front to rear.
# F/R 0 is the proper setting when only two
speakers are used.
# When the rear output setting is Rear SP :S/W,
you cannot adjust front/rear speaker balance.
Refer to Setting the rear output and subwoofer
controller on page 35.
3 Push MULTI-CONTROL left or right to
adjust left/right speaker balance.
Each time
MULTI-CONTROL is pushed left or
right, the left/right speaker balance moves to-
wards the left or right.
Left 15 to Right 15 is displayed as the left/
right speaker balance moves from left to
right.
Using the equalizer
The equalizer lets you adjust the equalization
to match the car
’s interior acoustic character-
istics as desired.
Recalling equalizer curves
There are seven stored equalizer curves which
you can easily recall at any time. Here is a list
of the equalizer curves.
Audio Adjustments
En
28
Section
03